Discussion Locked

Sound Card Left Channel Not Work

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Creative Labs Sound Blaster Audigy 2 OEM Sound Card and all of the sudden the left channel will not work. I used 2 sets of speakers to do this. When I plug in the pin all the way in the sound card, only the right works. If I pull it out about half way, right goes out and the left channel will work.
Any ideas? Thank you.
P.S. Please no comments about checking for a virus or spyware or anything of the sort.

3 replies

by thechas

Well, it sounds like your speakers function properly since you get sound from the left speaker with the plug partway in.

That leaves you with 3 possible problems:

Check your sound mixer console and make sure that the left channel output or balance is not set to minimum.
You should check all of the sound card settings to assure that the left channel has not been disabled.

The jack on the soundcard may be bad and the left channel contact is not connecting to the plug.

Or, the left channel output on the sound card is blown.

If your settings are correct, you have little choice but to replace the sound card.

Chas

by borginva

It started working again that same day. It would be the card itself and not the software. Still, I keep your ideas in mind and the points are yours.

This discussion is closed to new replies.