Discussion Locked

specs and features?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
ok I have a AHA-3940 MultiChannel PCI-to-Ultra Wide SCSI WITH dual external connectors. Can anybody give me the specs and features for this product or tell me where I can get the correct information. They don't have the specs and features on the manufacturer site.

5 replies

by wstoffel2

Is this the right model?

Adaptec 3940UW Technical Specifications

Specifications:

Computer Bus: PCI Local Bus
Interface Protocol: Bus master DMA
Device Protocol: 16-bit UltraSCSI
Host Bus Data Transfer Rate: Up to 133 MBytes/sec
SCSI Synchronous Data Rate: 80 MBytes/sec (40 MBytes/sec per channel)
SCSI Asynchronous Data Rate: 12 MBytes/sec (6 MBytes/sec per channel)
Advanced SCSI Features: Advanced SCSI Programming Interface (ASPI) compliant, Multitasking operating system support (through scatter/gather, disconnect/reconnect, tagged command queuing), Support for 255 simultaneous active SCSI commands per channel, Each channel is programmable via SCSISelect
Electrical Connector: One 68-pin, high-density internal connector for channel B
One 68-pin high-density internal connector

One 68-pin high-density external connector share channel A

Electrical Drivers: Single-ended, active termination
PCI Bus: 32-bit, 33 MHz
Single- and dual-address cyclesPCI local-bus address and data parity generation

SCSI channels: Two fully independent PCI SCSI channels bridged to system PCI bus
Device Support: Up to30 devices
I/O Operating Environment: DOS
Windows
Windows 95
Windows NT
Windows for Workgroups
OS/2
NetWare
UNIX (SCO, UnixWare)

Mean time between failure (MTBF): 278,789 hours
Physical Dimensions: 6.875 inches (17.463 cm)x 4.0 inches (10.16 cm)
Operating Temperature: -5?C to 60?C
Storage Temperature: -60?C to 95?C
Operating Humidity: 10% to 95%, non condensing
Power requirements: 5 V ? 5% at 2.0 amps maximum
Regulatory compliance: FCC class B, CE, IEC
Warranty: 5 years

This discussion is closed to new replies.