Discussion Locked

Speed of DDR RAM

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
The spec for my computer (Pavillion 5940 with 1.6 Ghz P4) says I can use PC 1600 and PC 2100 RAM. Are there problems using faster RAM? There is a special on PC 3200 RAM that looks great and would save me $$.

7 replies

by bfilmfan

No issues. Faster RAM will slow down to whatever speed the memory bus is clocking at. Just like you can buy a Porsche and drive 160 or just 6 miles per hour in it.

by jamesrl

I was hoping for real life experience. I do know that in older systems you could occasionaly have problems with "faster" RAM. But newer systems may not have the same issues.

by willcomp

Although in theory the faster RAM should work, it does not always do so. I have seen several older Athlon Socket A mobos, including one I use, that will not boot with PC 2700 or PC3200 RAM installed. The RAM is known good since it is stable in 333MHz and 400MHz systems.

So, if you buy some, make sure you can return it if it doesn't work.

Dalton

by jamesrl

Thanks - this is the kind of real life experience I wanted. I will make sure they have a good return policy.

I read over the DDR sections at Tom's and the Kingtson memory guide, and while they say it "should" work, they strongly recommend only getting the right speed.

James

by boli

I might be wrong but i think PC1600 RAM is rambus so tht will be VERY expensive and hard 2 find!

This discussion is closed to new replies.