Well the Brands and Models of the M'Board and Video Card would be of help here but as we don't have them I'll start at the beginning.
Some M'Boards come with the BIOS Battery disabled and you have to change a jumper setting to get the M'Board to actually work. You'll have to look in the M'Board Manual for this one but it is generally a 3 pin header with 2 pins shorted out by a jumper generally if pins 1 & 2 are shorted the Battery will be connected and if Pins 2 & 3 are shorted the BIOS Battery is disconnected.
Then depending on the make of M'Board and Video Card they may not be compatible so if the fans do not turn you have a Hardware conflict between the M'Board and Video Card and you'll need to change the Chip set type of the Video Card. This is a common thing to happen on AMD Boards with ATI Chip set Video for some reason some M'Boards do not like the ATI Radeon Chip set Video Cards.
Now if the fans are spinning but you are getting no picture on the monitor and I'm working under the impression that you already know that the monitor actually works you most likely have a dead Video Card. I ran into this just last week "Again" after my main supplier sent out the wrong M'Board so I had to change the type of Video Card which was Dead On Arrival a new Video Card of the same type cured that problem. The best way to check this out is to use a "Known Working Video Card" to check the M'Board out if it works then you have a dead Video Card and if the new Video Card works on a different M'Board you have either a Hardware Compatibility Issue or a Dead M'Board.
As you have not said what type of CPU you are using you can get by with only 1 stick of RAM installed but some CPU's will give better performance if there are 2 Sticks fitted.
Col