6 replies
by freetech
if you have a bootable drive, the linux disk should be bootable. just make sure your BIOS is set to boot from the cd-rom first, floppy second and hard drive third. assuming that you have a machine that will boot from the hdd, that should work.
ifyou need to boot from a disk other than a cd, get a floppy (win98 startup disk woorks well) that has cd-rom drivers on it and boot from that.
if you're booting from one cd and then putting another in, well sometimes computers can't deal with that kind of flexibility.
you may need to make a boot disk with linux, gimme a holler on my link above if i can help further.
by freetech
in reply to your e-mail:
this message typically pops up when you replace a cd in your cd-rom before exiting or closing out the first cd-rom.
you need to exit the first cd (in windows this means closing whatever window or application is using the first cd) before you put in another cd.
hope this helps.
feel free to e-mail if i can help further.
by pamela_saw
by greg.ahler
If you mean that you're starting the machine with a boot FLOPPY, my suggestion is to leave it in there throughout the install, unless the install process tells you to pull it. One thing to remember is, like any boot disk, the command files are on that floppy. If the install routine requires one of the instructions contained on the disk, it errors out. I make this simpler than it is, because Linux's boot floppys actually run a small linux kernel. Once the system is ready to reboot, after installation, then I'd remove the floppy.
One note, booting from the CD is usually the best way to go.
G
by pamela_saw
by pamela_saw
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending