Question Locked

Strange Window Appears Before Windows XP Logon

0 helpful
32 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When I boot Windows XP Home (purchased, legitimate), I get a strange window popping up after the splash screen and before the "Welcome" screen.

There is no text in the window, no text in the title bar, a couple of strange ascii characters in the upper left corner of the window proper, and only an option to press "Okay" to close the window.

I have no idea what this window is. I've tried various troubleshooting steps (Windows Install Cleaner; Registry Cleaners; unplugging everything but my AGP video card; various Start-Up managers) with no success in identifying or getting rid of it.

You can view pictures of the strange window and my boot up screens at:

http://www.members.shaw.ca/sudsyrocks/misc/winboot.html

Any help would be greatly appreciated.

Thank :-)

32 replies

by davedxb

go to goolgle...

type "autoruns"

That program will help you see whats starting up with windows (the box ur talking abt)

And then u can delete it.

Look in the "Logon" tab.

by sudsy100

Thanks a million for yer reply DaveDXB :-)

Autoruns is exactly the kind of Startup monitoring and configuration prog I needed. Not that it got the mystery solved yet, but it will certainly help in getting closer. I have a bunch of Startup tools (Startup Control Panel, Startup Inspector, StartRight), but Autoruns is far more comprehensive. Thanks again for the tip.

As far as using it to get to the crux of the problem, and keeping in mind my comments are only "best guesses" and "possibilities" . . .

-----------

In the Logon tab, there's only two entries that aren't listed in any other of my Startup utils:

RDP Clip Monitor
Userinit Logon Application

I don't think either of those would be the problem judging from info gleaned from Googling them.

-----------

In the Boot Executable tab, there's the Auto Check Utility of course.

This could be something to consider. My disks show up as fine, but there could be something wrong that Auto Check is detecting.

-----------

As far as the Drivers tab goes, there's a lot there to digest, but there's the usual "file not found" suspects I Googled for info on:

Changer.sys
i2omgmt.sys
lbrtfdc.sys
etc, etc (about 12 in all, which seemed normal according to all the tech forums I read).

There's a couple of obsolete entries (such as Leadtek drivers for an old TV tuner card I had), but nothing else that jumps out.

There is one entry in the Drivers tab that's odd. It changes name each time I've booted. Currently it's listed as a "file not found" called E:\WINXP\System32\Drivers\a5j0c51t.sys.

-----------

The problem with the strange window just seemed to crop up one day. I hadn't changed anything notable, and I'd never seen a screen like it even when I'd installed or uninstalled programs and hardware in the past. Of course, I've done many thorough virus, spyware, adware and trojan scans . . . all come up clean.

-----------

You can let me know whether this is anything close to a "best guess" so far, but it seems either the strange window is trying relay info about a hardware issue, driver problem or bootup snafu (d'uh ). I've unplugged every card and USB device in my machine (except the AGP video card) trying to see if it's a non-disk problem--no luck. Also disabled every Startup program--no luck there either.

Also, the Sysinternals forum strongly recommends not messing with the Logon or Drivers section at random. The only entry that seems like a candidate is the one that changes it's name each time (currently a5j0c51t.sys).

I'm tending toward thinking it's a hardware issue of some sort, but that's just a hunch. Motherboard? Power Supply? Disks? Dunno . . .

I posted my problem here mostly because in all my years of owning PCs (1984 to present), I've never seen a strange window I can't read pop up in between bootup and logon.

TIA for your input and help :-)

by lostuser

I've got the same problem on a PC I'm working on.

The text in the window, however, is unreadable. There is also text in the window title bar.

The PC previously had 97 viruses/malware/adware that I cleaned off using the hard drive as secondary. I did an AdAware scan and started a defrag (went about %5)

I stuck it in the PC and it came up with a windows activation message. I couldn't because the window locked up each time. I eventually replaced the wpa.dbl file with the wpa.bak file.

Now I get the weird window before login and I can't get system properties except in safe mode.

I did find I don't get the window in safe mode but I do get the window in safe mode when I choose logoff.

by older mycroft

So, since your picture is so badly out of focus, perhaps you could post with what the characters are.

by sudsy100

Thanks for your reply . . . much appreciated.

Sorry about the out of focus picture. Because there is very little to see, I posted it as an example of the window itself rather than the contents.

The title bar indeed has three characters in the upper left corner. They are (from left to right):

1. A blank rectangle
2. Lowercase a-acute . . . ? (ascii code 160)
3. A blank rectangle

Right clicking on the title bar gives two options:

1. Move
2. Close

I believe the main window contents vary upon boot. It usually contains two or three extended ascii characters ranging from solid single lines (ascii code 179 probably) to perhaps the ? character (ascii code 245).

It's apparent (not from my picture obviously) that whatever the intended message is, it is not being displayed readably in the window.

by older mycroft

So try, before you shutdown, changing your desktop colour scheme, preferably to something you would not normally use.

Some colour shceme that would normally look awful, perhaps a stark negative, or high definition colours.

On next bootup, you just might be able to see what is inside this strange box.

by kizer

I have the same problem on a friends computer and the pics are the same as well.

was hoping there may be some more info on this or perhaps it was figured out elswhere.

the computer was pretty dirty but am mainly just curious about this window.

by animatech

Is it happening when you log on or when you boot up?
Did you try logging with the default admin account or creating another account and login with it?
Have you tried booting to safe mode and then login in?, What happened then?

by sudsy100

The strange window appears before the logon screen (after the splash screen finishes).

As I just wrote to Old Mycroft:

"I started up in safe mode, logged off my usual profile, and logged back in as Admin (because you can't use the Admin account in Win XP Home in Normal Mode). When I logged off my usual profile, the strange window screen still appeared before the logon screen where you select the account to logon with. But, there was some readable text in the title bar along with the assortment of ever-changing ascii characters: Enterprise Root"

I also created a Test user account, and logged in with that in both Safe and Normal Modes. Same strange screen.

So, it's a logon issue I would assume. Safe Mode, Normal mode, different user account, Admin account . . . all have the same problem.

But, at least in safe mode I pried some readable text from the title bar. I Googled "Enterprise Root", and TTYTT, didn't see much that helped. Most of the results had to do with "certificate roots", "smart cards" and such. I have a Digital Camera USB Card Reader (I have no idea whether that's relevant), but the strange window appears whether it's unplugged or not.

Thanks for any help you can provide . . .

Sudsy

by animatech

It sounds like you have a problem with certificates.
Have you installed an application\hardware before the problem started?
Did you accepted a certificate from a web site (Such as bank etc...)?

by d_artagnan16

Got the same problem. I smash my head against a wall,tried to shoot myself and... after 24 hours found the answer (please thank to reh2k,if it works)(in my case works!!).

That is a disclaimer set on your machine. Someone must have put it there.

You can remove that by doing the following:

Open control panel
Go to Administrative Tools
open Local Security Settings
Double click Local Policies
Click Security Options
Find and make sure that Interactive logon: Message text for users attempting to log on... is empty(open it,make sure and THEN press ok. Now, next to the interactive logon message text.. is nothing, blank)
Then under there there is message title for users attempting to log on is empty also(same as above).
Presto! No more annoying box! Hope this solve the problem!

by davmil2002

Credit to "rouge remover" which pointed me to [HKEY_CLASSES_ROOT\CLSID\{3F2BBC05-40DF-11D2-9455-00104BC936FF}] (those r zero's not letter "O". Strangely, the key appeared blank. After exporting value, told RR to remove it... it came right back. Same on a second try.

So I got 'fat-fisted' and just deleted it with the delete function of regedit. At first it told me it couldn't, then it deleted it a moment later.

For reference (or if someone knows i've caused myself another headache), the 2 values that didn't display, but did export looked like this..
[HKEY_CLASSES_ROOT\CLSID\{3F2BBC05-40DF-11D2-9455-00104BC936FF}]
@="Implements DocHostUIHandler"

[HKEY_CLASSES_ROOT\CLSID\{3F2BBC05-40DF-11D2-9455-00104BC936FF}\ProgID]
@="MPR.DocHostUIHandler"

Booted clean after that. Key didn't reappear.

by sudsy100

I tried changing my colour scheme a few times, but no luck in getting anything identifiable. Just the same ascii characters.

But . . . I started up in safe mode, logged off my usual profile, and logged back in as Admin (because you can't use the Admin account in Win XP Home in Normal Mode). When I logged off my usual profile, the strange window screen still appeared before the logon screen where you select the account to logon with. But, there was some readable text in the title bar along with the assortment of ever-changing ascii characters:

"Enterprise Root"

There was still no readable characters in the window proper.

Hmmm . . .

by animatech

You can try running sfc /scannow
go to the Run box on the Start Menu and type in: sfc /scannow
You will need your windows installation CD.
Other then that I am not sure :(
You might need to re-install windows

by sudsy100

Thanks for the tips and suggestions . . . much appreciated :-)

I did a test run with SFC, and it wanted to replace virtually everything from my Win Xp CD (mostly because of Windows Updates I imagine). I might give it a run-through and then redo all the updates again to see if that does the trick.

Otherwise . . . that window is annoying, but I don't think it's critical. Seeing as my machine is clean of nasties, I may just throw in the towel and put up with it for the time being.

Thanks!!

Suds . . .

by sudsy100

The strange window problem has been around for at least two or three weeks (IIRC). I didn't install anything that directly seemed to cause the problem (for example . . . I did a housecall scan at trendmicro.com, but the window was there before that). Installed an HP PSC 2110 I had given to me about 7 or 8 weeks ago. There may have been a certificate from the HP web site, but I can't recall for sure. Regardless, that installation went A-Okay.

Did have a power outage a wee bit back, but I don't think the strange Enterprise Root window popped up immediately after.

The only reference to "root" or "certificate" in Autoruns is the famous:

e:\winxp\system32\cryptsvc.dll

CryptSvcProvides three management services: Catalog Database Service, which confirms the signatures of Windows files; Protected Root Service, which adds and removes Trusted Root Certification Authority certificates from this computer; and Key Service, which helps enroll this computer for certificates. If this service is stopped, these management services will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start. Microsoft Corporation"

Could it be a corrupt cryptsvc.dll perhaps? Nothing shows up as skunky on scandisk, but that doesn't mean anything really.

Any suggestions based on the info above will be greatly appreciated!!

Suds . . .

by sudsy100

Just wanted to follow up the "strange window" problem myself and a 1/2 dozen others have been stricken with (thanks to all who E-Mailed me and/or replied via this forum).

Unfortunately, none of us could dig up a solution or even a concrete diagnoses. I ended up having to reinstall my OS to a different hard drive (as animatech predicted).

The strange window is gone with the OS reinstall, but the cause of the original problem remains a mystery. There were a zillion guesses and troubleshooting tips, but none solved the strange window problem for any of us. Oh well . . . there's worse things in the world than having to reinstall an OS and all your apps ;-).

I leave the topic with a few factoids in case someone ever digs up the scoop on our strange window buddy:

We had clues: the "Enterprise Root" title bar text I got once in Safe Mode; another "RSA Signature Key" title bar text I got only one time; the fact that the text--readable or otherwise--on the title bar changed all the time (this according to others who E-Mailed me as well); the fact that the window appeared at all prior to login in the first place.

Theories ranged from a trojan/virus, hardware problem, Root Certificate problem, corrupt system file(s), autocheck burping, alien intervention . . .

Thanks again to all who replied!

by khalid722

ok question may be closed now but i think you had some local group security policy running

by stealthtools

Below are some images of a program contained in many viruses and non-virus programs. You may encounter a program like the one below by simply clicking a link on a web page, or installing a program. NO virus protection software will detect this because it is NOT harmful to your computer in any way. ALTHOUGH to the user it is harmful, because you can't restart your computer and log on WITHOUT clicking on the blasted OK button. - This is very frustrating when you are setting up something like a graphics card which restarts automatically when it hangs your computer.

Here are some images of a program contained in many virus/Trojan programs, and in some pranks people like to play.

Hope this helps,

Stealth

EMAIL @: Stealth_Tools@Hotmail.com

IMAGE #1:

Free Image Hosting at www.ImageShack.us

by rob miners

By default, Windows XP Professional does not clear the virtual memory pagefile when the system is shut down. In some organizations this is considered a breach of security because the data in the pagefile might be accessible to users who are not authorized to view that information. To enable this feature and clear the pagefile each time the system is shut down, start the Group Policy snap-in, expand Local Policies, and then select Security Options. Right-click Shutdown: Clear Virtual Memory Pagefile and then click Properties. By default, it is disabled. To force Windows XP Professional to clear the pagefile when the system is shut down, select Enabled.

It could be just garballing the information.
See what happens on a restart.

by u1timacaitsith

True Blue, you truly are magnificent. It turns out that this silly, but annoying, issue WAS a pagefile problem. All it took was your advice to make it all go away. Thank you, thank you, thank you.

by aneirin

Although this was not the fix I needed, it sent me in the right place to fix this issue on our machine. When I went to use gpedit and navigate to the location you specified, I got a message letting me know there was a problem with parameters in secedit.sdb. I replaced secedit.sdb with a fresh version, and the problem went away.

by rob miners

its been Pagefile, Legal Notice and now secedit.sdb that has caused this problem. Interesting. ;)

Thank you for the feedback it is very much appreciated.

Rob

by webmaster

I started to get this strange login box with the changing UNICODE characters when I mistakenly deleted the entire GPExtensions from the registry. Since this machine is no longer attached to the network, I made one local policy change, rebooted, changed it back and rebooted again, and have since had the box pop up at login.

by honkypooh

Had the same problem with that strange popup before every login under Windows 2000 Professional (Win2k) and your solution helped me out! You made my day... deep bow

by golfer99999

Try adding the following to your registry...

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\software\microsoft\windows\currentversion\policies\system]
"legalnoticecaption"=-
"legalnoticetext"=-
"legalnoticecaption"=""
"legalnoticetext"=""

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"LegalNoticeCaption"=-
"LegalNoticeText"=-
"LegalNoticeCaption"=""
"LegalNoticeText"=""

by csanders

Thanks golfer99999. After hours of trying to resolve this issue, this "worked" for me.

by anhlh89

Yeah, I know it exactly. First time I faced with it 1 month ago. It slowed down my computer.

The character in the box is Chinese. I think it 's some kind of warnings.

Here is detailed situation: I removed my hard disk and pluged it in my friend 's computer to copy some files. In her computer, I noticed some signatures of virus and I decided to scan this disk when I pluged it again. But my antivirus couldn't find this. I used Avira AntiVir Personal. ANd I downloaded and installed ThreatFire. It found some kinds of suspicious behaviors and stopped it. But the computer was slow. I came to WinHeal Utilities (a tool written by Vietnamese to repair a virus damaged computer). When I used "AutoHeal" function to restore defaults settings, things had went well. I restarted my computer and the box appeared.

I could logon. However, many functions were locked in my account. Ex: I couldn't open Explorer, my Antivirus had gone away, no regedit, msconfig , etc.

I decided to logon in Administrator account. In addition, I created some new admin accounts to test. But things happened again. When I used WinHeal Utilities "AutoHeal" functions in new account, the same things were happened like my previous account. It was very nasty. I also scan for virus in new account but my antivirus couldn't find anything. ThreatFire also coundn't find anything.

This virus uses autorun feature to infect removable devices. It can spreads easily.

The second time I faced this is at the moment. I have exchanged my USB to my friend and when I open this. I see some kind of hidden MS-DOS files. It disappears automatically because TrendMicro has quarantined them (I have checked and known they are Kavo viruses). I use WinHeal again but the BOX reappears on logon screen.

I saw a variable of this virus on different computer. I used WHU (winheal utilities) and Unfortunately, I couldn't logon. It always logon and logoff automatically.

I live in Vietnam and I see that many computer viruses come from China. Some viruses are very difficult to get rid of. Many computers in Vietnam are infected with them because Vietnamese people usually exchange data by removable devices such as USB disk. But it 's very strange that many antivirus program can't get rid them completely.

P.S : in the first time, i chose to format and reinstall windows.

in the second time, i don't notice any slowdown. I also install Ninja Pendisk to eat autorun and protect USB disk.

Update : in this afternoon, it removes my customization in my accounts. My account logons like a new account . But when I logoff and logon again, I come back to my account. A BOX appears again !

by artillary2001

Its NOt a virus, or anything like that... duh lol!!. it looks like someone has inserted some bad registry entries, there is a way u can fix it... lol

providing you have admin access on the pc, go to start, then run... type in gpedit.msc

this will bring up the group policy window, navigate to the following:

Computer configuration -->Seuciryt Settings -->Local Polices-->Security Options..

Now look for the following: Interactive Logon: Message text for users attempting to log on... and Interactive Logon: Message title for users attempting to logon.

Now double click on them and if anything is found in the text boxes... Delte them and Click on OK...

Look also for the Interactive Logon Do not require CTRL+ALT+DEL once found double click and click on the enabled option the ok.

Now close the Group policy window, then head back to start and then run... now type in the following command: cmd /k gpupdate/force
then click ok... the command windows should open saying:

Refreshing Policy...

User Policy Refresh has completed.
Computer Policy Refresh has completed.

Now reboot and all should be well lol...
let me know how it goes..all the best

This discussion is closed to new replies.