Discussion Locked

suitability of current sdram to P-II

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i want to know whether the currently available sdram of 128Mb,133Mhz or more can be used with the old pc's which have a 64MB,100Mhz or less.please clarify .

5 replies

by dmiles

The speed at which data mves on a bus is controlled by its clock speed,which is measured in (MHz)

66mhz bus will accept 100Mhz SDRAM modules,yet the maximum could be 128mb of memory

The 100mhz front side bus will be compatible to use 100mhz and 133mhz memory modules,but the maximum amount is determined by the motherboard specification,check the motherboard manual to see what the specs on max.amount of memory could be installed

by thechas

If it were just a simple issue.
About 70% of the time, the new DIMMs work just fine in older motherboards.
It realy depends on your motherboard and BIOS as to whether or not the new SDRAM will work in it.
I have seen P1MMX boards that will work with any SDRAM module I throw at it, and PII boards that are very finicky.
Genuine Intel motherboards will usually accept the newest DIMMs if you update the BIOS.
Other mfgs are not as willing to keep the BIOS up to date for old products.

The best way to check is to use the tools at the major memory mfg web sites to identify compatable RAM for your system.
www.crucial.com
www.pny.com
www.kingston.com

Some MBs require 4 clock line RAM modules.
Some work with only 2 clock line RAM.
Check out the white paper on SDRAM DIMMs at Kingstons site.

Further, I have seen more problems recently of different brands of SDRAM not working together.

If you have an idependant local PC seller, they might be willing to install and verify that the DIMM works in your system for no extra charge.

Chas

This discussion is closed to new replies.