Discussion Locked

Suspect HDD Failure

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is a odd one. After shutting down my pc for a few days for non-use, and rebooting yesterday, I experienced the following errors suspecting a failed HDD.

Factors: W2K Pro, Nortons Utilities, Western Digital 40gb HDD.

Rebooted > HDD error found as SMART capabilities has been made somehow disabled? - had to use default settings > got into windows.

Ran Nortons disk drive (NDD) utilities with an (undescribed) error on HDD, suggested to run NDD32 file or select fix > restarted NDD withauto fix enabled.

In order to run the "fix" had to reboot > rebooted into black screen with HDD activity light going off and the floppy (FDD) light steady green and a beep ever 30-seconds, and unable to reboot or shutdown machine.

I suspect a failing drive, but the HDD is about 4-months old. Is there a way to recover my HDD, or what else may be going on that I am missing?

Any feedback welcome. Thanks and Happy Holidays!

8 replies

by wim

I guess the norton fix didn't fixed your problem, I suggest that you place a new/old harddrive in your pc and install w2k on it, then take a look at your "crashed" harddisk (install it as 2nd HD)

by opatzg9

I'll agree with the above, get that new hard disk, get it bootable and then try using the old drive as a slave so its not trying to boot from it. Then see whats left to recover and copy it over before reformatting the old drive. It may still be fine but you really need that backup before you go through the fdisk/formst/reload windows fix. Good Luck

by cg it

Norton Utilities can not gain exclusive use of your hard drive when W2K is running. So, what happens is that Norton puts in a disk check request [re schedules as chkdsk in system tools next time you reboot your computer]. Chkdsk is run when you reboot, not Norton Disk Doctor. What you can do[if you have the Norton Utilities CD] is boot to the Norton CD and run Disk Doctor. you can also run scandisk at a command prompt with W2K running or boot to a floppy with scandisk on it. I suggest that you run NDD from the CD. It probably can recover a bad sector on the drive in lieu of marking it as bad. If you have a bad sector and the drive is only 4 months old, get a replacement via the warranty!!!!!

Also, what I suspect is that smartdrive is finding a bad sector on your hard drive [area where if data is written, that data may be corrupted] but that that area has not been marked as bad. To get your computer to work ok, disable the smartdrive utility in your BIOS.

by cg it

note: Question really. Is your HDD formatted FAT32 or NTFS? Makes a big difference. NDD may not be able to scan your HDD surface for a bad sector if it's formatted NTFS. If so then you'll have to use scandisk [with automatically repair error].

This discussion is closed to new replies.