Discussion Locked

switches

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
benefits of switches over hubs

7 replies

by ann777

switches have memory built into them and they learn the address of where to send packets. This speeds the sending of repetitive packets to the known location.

hub has nothing. each time a packet needs to go to a certain machine, the hub goes through standard finding of that computer all over again.

see the following link on hubs and switcches:
http://www.intel-inside.co.gg/support/inbusiness/24050.htm

by thechas

Basically, a switch can route the traffic more effectively than a hub.

If 2 PC connected to the switch are transmitting data only between each other, a good switch will provide them with a nearly direct connection.

Wereas, a hub only allows each connected PC to share the connection.

Chas

by wim

Hubs are network devices that divide the available bandwith over all devices connected to that hub, so if you have a 100Mb hub, with 5 pc's connected, they all receive 20Mb bandwith, all devices connected use the same bus to send or receive their data, that's why you have tha collision light on a hub(=collision domain) (when 2 devices send data on same time and the collide on the wire)
this hub is a layer 1 device (OSI netork model)

A switch is a layer 2 device, the big difference with a hub, is that it connects your source network device on the switch with the destination network device in the switch based on the address in the packet, this way the bandwith isn't devided over all network devices and switches will be faster that hubs. Another advantage of switches is that they allow full duplex operation, you can send and receive data at the same time (unlike hubs)

graphics --> http://www.proxim.com/learn/library/guides/gd2001-07-17.html

This discussion is closed to new replies.