Discussion Locked

System Not Available

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a problem with an Hp ColorlaserJet 4550N, when i switch it on it runs the memory test and gets to 64MB and displays the message on the display "system not available" what could be the problem?

1 reply

by lizzy

Has this printer ever worked before? If so, try the hp support site. If you have an error code number that goes with the error message, that would probably be easier to locate. Searching "system not available" pointed to this page:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl11241&locale=en_US&docId=97042

(There are no spaces in any URL's--copy and paste to address box and press enter after removing extra spaces that may creep in).

This may sound hokey, but check the manual. Make sure all drawers are closed properly, if new that all styrafoam and tape has been removed, that the network card is connected to a good patch cable\connection (try to see if a workstation or laptop can log in from where you're setting up this network printer).

If all else fails, get an HP rep on the line with you to walk through what you're experiencing. Please let us know what was causing this by posting a comment. Best wishes.

This discussion is closed to new replies.