Discussion Locked

T1/FT1 ROUTER

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Company is having a T1 line installled, and we've been informed that we need a Router. It will be handling the Dedicated Point to Point for Service Department (128k,) and the internet access (128k) in both buildings. They suggested a Cisco 1600, but that is pretty expensive. Looking for a good inexpensive (but not CHEAP) router to handle our needs.

This is a new area for me and any help you give will be greatly appriciated.

Chuck Sharon
MIS, Hydraulic Service Co., Inc.

5 replies

by cybernutztim

When considering a router support can be as important as the hardware itself. Cisco is the "standard" but they have 24/7 support as is both a help desk as well as problem solving. They also offer 4 hour replacement if you buy the right suport package. YOu can oonly get these contracts from Cisco. If you but used, such as available on e-bay. You are on your own.

In short there are loads of Routers on the markert D-Link, Linksys, Netgear, etc., but in my opinion the support is more important than the hardware itself for mission critical equiptment. If you don't mind being down for a day or two go inexpensive, but the long term costs(ie. downtime, lost productivity, labor) could be more than the short term costs of the equiptment.

by wlbowers

There are a lot of places that you can reduce
cost. This is not one of them. Not only would I
buy the Cisco I would put a contract on it. As
answer 1 said they have excellent 24/7 tech
support and Cisco products work.

Lee

This discussion is closed to new replies.