Discussion Locked

TEKTRONIX PHASER 360 PRINTER PROBLEMS

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I AM HAVING PROBLEMS FIXING IMAGE QUALITY PROBLEM ON THE ABOVE PRINTER.SOME IMAGES ARE NOT BEING PRINTED.I HAVE TRIED TO DO THE CLEANING FROM THE CONTROL PANEL BUT COULD NOT IMPROVE.PLEASE MAY YOU ASSIST ME THIS ONE.IAM USED TO SERVICING HEWLETT PACKARD PRINTERS AND THIS ONE IS MY FIRST ATTEMPT ON TEKTRONIX PHSER PRINTERS

1 reply

by ann777

"Some images are not being printed"????? Is the printer selectively printing some of the images or all of them?

The Phaser 360 is a color/wax type of printer. You place four sticks of color at the top and it melts it to the sheets of paper inthe proper quantity to produce a very good (usually) page.

It has a few modes for cleaning. If you have White or lighter streaks across the page... then cleaning will help. If you have glopping, cleaning will help. But if other things are happening, then you need to call Xerox for help.

You also MUST use the proper kind of paper for this printer. Or you will have problems.

If you have streaks across the page and a cleaning does not help, then you must call the proper peole for support. There is a more intensive problem that cannot be resolved by a simple cleaning. Replacement parts may be necessary. Call your local Xerox for directions on repair or for support.

This discussion is closed to new replies.