7 replies
by stillatit
Like many business decisions, it is a value thing. Beware of averages -- you need projections for the specific machines you are interested in.
Each machine model has a life cycle, from pre-introduction hype, to introduction, to new product, to mature product, to no-longer-supported product, to scrap metal. The time to go through these stages depends on the vendor, on how much the machine was in advance of the market on introduction, on how fast the technology is moving, on new breakthroughs,and so on. Some machines have taken ten years or more to go through these stages. Some, due to various factors, have cycled much faster. You need to talk to your potential vendors about their plans and committments to the models you are interested in.
Where the peoduct is in its own model life cycle will affect the life cycle of the machine you buy. If you buy a machine in the late mature product phase, you have less time before the manufacturer drops it than if you bought one in the new product stage. Accordingly, you probably pay less for the older technology.
How much machine you buy versus your needs will also affect your cycle. If you deliberately buy for a projected 7 year growth, you may not care that your machine model is no longer sold by year 3 as long as you can get support. If you buy for today, planning to buy upgrades, you need a product that will still be current enough to have upgrades available for several years.
Good luck.
by bjacksonmba
by csmith
I would start with the IBM white paper on infrastructure costs, because that is really the heart of the question Try:
http://www-3.ibm.com/e-business/doc/content/lp/fieldguide.html?formId=22&P_FormId=22&P_Campaign=101CPW55&P_Creative=FGLEAD
Then read:
http://www-1.ibm.com/servers/eserver/zseries/library/whitepapers/gf225145.html
This is about using applications on the S/390.
I assume you are going to be running a CRM application?
After that, I would recommend contacting IBM.
The questionyou have asked, is actually very difficult and complex, and requires solid useage information, and, in depth study, to get an accurate picture of your lifecycle costs.
Regards, Chris
by bjacksonmba
by computechie
by bjacksonmba
by bjacksonmba
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending