Discussion Locked

transfering files between drives

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am going to install a maxtor 60 gig hard drive
as the master.I want to transfer all the data off 0ff the existing drive to the new drive,the old drive is configured with a dual boot win 98 and
and windows 2000.If I set both drives up as masters will I be able to transfer all the data to the maxtor

7 replies

by timthetoolman

Hi,

You can have two masters only if they are on separate controllers, so yes it can be done that way.

If you've only got one cable, then you can set the second drive up as a slave. There is no real difference on performance...

Take a look at the following page if you're worried about setting your new drive as a slave.

http://www.hardwarecentral.com/hardwarecentral/tutorials/39/6/

(remove spaces from above URL)

...you can always set it to be the master later...

Cheers,
Tim.

by mrgeorge

You can use a program called "Ghost". It will allow you to do a drive to drive clone. It will copy everything from on drive to the other. It is a Symantec product. I believe there is also a Western digital product that can do the same thing.

by yacco

If you bought your new Maxtor drive retail the Maxblast software included in the box will do what you want. It does a lot of hand holding too.

This discussion is closed to new replies.