Question Locked

trouble installing pci graphics card

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi there i recently bought a g force fx 5500 graphics card to fit in pci slot,for my comp.
i unistalled old divers for the old graphics card,switched pc off and installed new card.
plug my monitor in to the new card but nothing came up on the screen.i thought it could be the monitor because its quite new a samsung 19in,tft.

6 replies

by thechas

First, check the manual for your system / motherboard. There may be a jumper that needs to be set to disable the on board video.

Then, move the monitor cable back to the on board video.
Boot up and enter BIOS setup.
Under one of the advanced settings menus, there should be an option for what video to use first. Make sure it is set to PCI.
Also, look under integrated peripherals. There may be an option to disable the on board video.

Chas

by aprobert57

its weird because ive installed the new card and checked it in display hardware says working fine, but when i plug the monitor cable into the new card, windows loads up but no picture,just a message on the screen saying mode not supported.

by thechas

That new bit of information changes what I believe is happening.

What the message means is that the video card is set up in a mode that is not supported by the monitor. That is, the resolution or refresh rate set for the video card does is not supported by the monitor.

You might need to boot into safe mode with the monitor connected to the new card. This will force a standard low resolution default setting.

Then, when you boot back into Windows you should be able to properly detect the monitor and set video modes that are compatible.

Chas

by aprobert57

hi ive tried what u suggested still nothing came up on the screen at all,i have this old monitor so i tried the card with that and nothing came up on the screen with that monitor. do u think there could be something wrong the card itself i could be wrong cause the card is quite new.

not sure what to do now so might just sell the card and get another.

by thechas

The best way to see if it is the card is to try a different PCI video card in your system, or try this card on another system.

The fact that you have no video with 2 different monitors does point to the card being bad.

Chas

This discussion is closed to new replies.