4 replies
by terrence.harman Accepted solution
by tech_dave0099 Accepted solution
I am guessing that your new DVD drive is also a SATA device, but, you must only have 1 SATA port on your mobo and that is currently being used by your hard drive? Do I have that correct?
If so, did you install the driver for your DVD-RW? And does that PCI card have a control panel that you can choose what type of device is connected to it?
by terrence.harman Accepted solution
by cg it Accepted solution
If this is one of the Samsungs many users have reported that the SATA burner is still seen as Mass Storage by mainboard BIOS's. If you run a RAID Array, and you plug this in to onboard SATA controller the SATA RAID utility will see it as a HDD.
If you use a SATA PCI controller card, they you need to load up the PCI controller card drivers which will control the SATA DVD burner.
that's about all I know about SATA DVD drives.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending