Discussion Locked

troubleshooting

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

1)in some cases the cd-rom give the following message the device is not ready althogh it have cd
and it canot read it?
2)the computer hang up?

3)how to increase the speed of the computer without adding hardware

5 replies

by thechas

The simplest thing to do is to update the IDE bus-master driver for the motherboard.
If this is a name brand system, go to the mfg web site, and download the latest IDE / system driver for your system.

If you know who made the motherboard, or the chipset on the motherboard, go to their web site, and download the correct driver.

If you need help identifying the motherboard, there are tools and guides at www.motherboards.org

Chas

by salahkasem

Dear sir;
I run belarv advisor and give the type of the board is;pcchipsM766LMRT and looked pcchips web sit and idonot find my board in the list of boards

by salahkasem

Dear sir;
I run belarc advisor and give the type of the board is;pcchipsM766LMRT and looked pcchips web sit and idonot find my board in the list of boards

by daz'n'ash

your motherboard is made by PC Chips model number M766LMRT.
you can find the download page at the following link, make sure there are no spaces in the URL when you paste it into your location bar in your browser.
http://www.pcwave.com/pcchips-bios.html#M766LMRT

Scroll down the page until you come to the model number of your board and download the zip file.

by daz'n'ash

Alternatively you might try Intel web site for drivers for the Intel 810 chipsets on the motherboard.

Hope all this helps you.

This discussion is closed to new replies.