Discussion Locked

Trying to access printer hangs system

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

About a month ago, my Lexmark Z32 stopped printing; Win98SE started taking 5-10 minutes (instead of 30 seconds...) to load.

Trying to print always hung the PC, tho' after a few minutes I could launch a new app (or alt-tab between progs) - but no printing...

I tried a new (different) printer - same story. And another...

I got desperate: I ran regedit, deleted any and all keys pertaing to "lpt1:" or "printer" or "Lexmark" or "Brother" (the laser I tried) - then deleted all references tothe same in win.ini and system.ini...

This allowed the printer port to get recognized (not done for a while...) and the installation program for the Lexmark (most recent download) got to 100% - then hung...

I read in many posts about copying WinME's spoolss.dll file in the win\sys dir (no difference), and that there may be some problem with anti-virus programs - so I uninstalled any and all I had - still no effect.

Does somebody know of how to strip any *other* references to lpt1, printer(s), etc., that I may have missed? I want to assume Win98 is just
confused, and that *hopefully* I can get it unconfused enough for it to re-initialize ... something. I don't want to reinstall Win98, due to the many progs installed (not to mention gazillions of MBs of critical, etc., updates...)

5 replies

by rmsmith

please see previous comment (lots of free space)...
I *really* don't want to reinstall... *sigh*

by rmsmith

There is well over 8GB of defragged (thanks, Diskkeeper) HD space.
Recently, when I tried (again) to get the beast to work, I got the error:
spool32 caused an invalid page fault in module
(it occurred previously; that's what I searched on and found the spoolss.dll suggestion)

Next? ...

by mmurdock

I had a similar problem and fixed it by unhooking the printer, booting to windows, then go to start-settings-printers and deleting the printer from there. It took a little while to delete it, but it fixed the issue. I then shut down and hooked up a known good printer and installed it and it is working fine. I am sure you probably tried this, but if not then hopefully it will work for you....later

mark

This discussion is closed to new replies.