Discussion Locked

Trying to fdisk a HDD

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a HDD that has a partition on it. It was used as our Internet server using Linux. I fdisked the C drive but it won't let me delete the extended DOS partition. It keeps coming up with a message saying that I have to first remove the logical drives but there isn't any.When I check for logical drives, it tells me that there isn't one. Could somebody please help me with this problem as I want to get rid of the partition all together?

Thanks

12 replies

by pahosler

fdisk won't do it, you need to use partition magic, or you can even boot from your linux cd - like you are going to install it - and use diskdruid.

remember you will still have to use:

fdisk /mbr

from the dos command prompt to get rid of lilo, but do that after you repartition your drive.

Good Luck,
Paul

by csmith

When the HD gets this screwed up, the best solution is to download the Manufacturers' Hard Drive utility.
Most manufacturers have a zero fill option or something similar. This will totally blank the hard drive and almost return it to the status it had when it was new.
You must use the utility from the manufacturer of the hard drive. They don't interchange.
(These downloads are free.)
Regards, Chris

by dark force

Another option to rpartition a hard drive is to boot using either the 3 NT Boot Diskettes, or the NT CD-ROM if available. They will give you the option of creating/deleting any partiions that exist on the drive. Then you simply exit out of the install.

Good Luck,
JR

by dark force

Another option to rpartition a hard drive is to boot using either the 3 NT Boot Diskettes, or the NT CD-ROM if available. They will give you the option of creating/deleting any partiions that exist on the drive. Then you simply exit out of the install.

Good Luck,
JR

by grump

Use DELPART.EXE from MS
I use it all the time.. Will remove any and all partitions from Hard Drive.

Works FINE!

This discussion is closed to new replies.