Discussion Locked

TV Converter???

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Is there a simple program/software anyone would recommend/suggest to enable a stand-alone, desktop computer the ability to transfer the image and sound of what would normally show up on the computer monitor to go on to a standard television screen??? This is a one time need that we have to do this and most likely won't have a need again, so we're not looking at spending alot of money on doing this. Also, we're more interested in the most simplest way than the more complex. Any advise, suggestions, directions would be helpful.

QPS

8 replies

by cg it

buy a vid card that has TV out capabilities. The software that comes with the card will have the TV decoder with it.

by cg it

Vid cards with TV out aren't that expensive [don't need the high end gamer vid cards]and you can just lug the TV over, plug in the coax cable from the TV out on the vid card to the TV and viola! Sound will come out of the computer speakers

by qps

This helps a little, but we need the sound to come out of the TV as well. What we'll be doing is recording form the VCR the images and sound that will be converted to the TV. Can the audio be sent to the TV also???

by parvus1202

You said not a complex one, but what you are asking is a complete set of video/capture card. Like the Pinnacle DC30, this card have video/audio out. If you are using graphics card like GeForce 400, it only have video out to TV, and the sound comesout of the audio card or onboard audio . Now if you want to record the video and audio into VCR, what you can do is connect the sound output to your stereo, and out that sound to your VCR, and then the video you can connect to VCR and to your TV. But you need a video player on your computer like Quicktime, DiVx Codec or Microsoft media player.

by cg it

I agree with answer #2. Setting up audio and video with vid capture all on the TV is a little more complex and expensive than the parameters you first asked for.

This discussion is closed to new replies.