5 replies
by dmiles
See the following site for installation instructions
http://www.ask.asia.creative.com/htmlhelp/graphics/geforce/graphics_tv.htm
by enemy0110
by guruofdos
Assuming you have a TV out connector...this will either be an RCA (Phono) connector or a 4 pin Mini Din for S-Video. Both of these are Analogue, not Digital signals and have to be connected to either AV in or Line in or S-In on your VCR. Set the VCRto the AV in rather than a channel.
The driver has to be set to display on the TV Out. This has to be set for NTSC in the US, or PAL in Europe. The driver may have to have TV out enabled, and you will only be able to use a resolution of 640x480 or 800x600 and the refresh rate can be no more than 72Hz. These settings can be changed in Display Properties where there should be a tab for TV out if you actually have a TV Out version of the card.
by enemy0110
by enemy0110
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending