Discussion Locked

TV Tuner video recording - no sound

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi, I just installed a Mercury TV Tuner card, and as recommended in the manual, connected the Audio Out of the TV Tuner card to the Line In of my Sound Card (Creative SoundBlaster, I think). Anyway, in the settings of the TVR software version 3.0 that I got along with the card, I can select Audio Source as None or Line-In. The manual says I should select Line-In while Recording from cable TV. Anyway, I do the recording and all I get is silence which turns to hissing if I turn the volume way up and some faint mumbling of voices. I don't know why but the sound isn't getting recorded. Please please please help.

Thanks,

Kamal

10 replies

by kennethsf

Well, make sure you have Line In selected, with sufficient volume, and not muted, in the recording input selections on *your audio card configuration program* (usually reachable by double-clicking on the speaker icon on your system tray and then Options > Properties > Recording) and not only in your video record software.

HTH

Ken

by gaur

Yup. I've checked all that. The Line-In volume is at full and not muted. Now what?

by cg it

humm ok you've got the coax cable from outside connecting to what? the Tuner card or a TV?

by cg it

I ask because some use their TV and not their monitor. If your using a TV you need to run an audio line from audio out on the TV to line in to the Tuner card then patch over to the sound card.

by gaur

The cable wire is split in two - one is in another room for the tv and this comes to my room to the tv tuner card. I perhaps didn't mention it but I can watch tv with the sound. Its just that when I record it, it records the video and not the sound.

by gaur

The cable wire is split in two - one is in another room for the tv and this comes to my room to the tv tuner card. I perhaps didn't mention it but I get sound when I'm watching cable on my computer using the tv tuner card. Its just that when I record it, it records the video and not the sound.

by cg it

by the way, you recording this on your PC? if so what editing software you using? Personally, I would go with a different card than the Kobian Mercury TV Tuner Card. Like the Hauppauge WinTV. Better support.

This discussion is closed to new replies.