Question Locked

Two operating systems

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a new computer with Windows Vista Home Premium pre-installed. I added a second hard drive(40g). How do I install Windows 98SE on it so I can use existing software & hardware that is not conpatible with Vista? I have a Gateway System Restoration Disk from my old computer, Windows 98SE.
Help is appreciated. Thanks

3 replies

by thechas

There are MANY issues with what you want to do.

The first is that the copy of Windows 98 you have is an OEM copy that is specifically licensed to the original hardware it was bundled with. Installing that copy of W98 on another system is a violation of the license.

Next, since your copy of W98 is on a restore disk, there is a very good chance that it will not install on different hardware. Restore disks are notorious for having software that verifies the hardware being used is from the manufacture that provided the disk.

Then, can you find W98 drivers for all of the hardware in your new system? If you can't find drivers, the hardware will not work.

How much RAM is on your new system? Windows 98 can have issues with more than 512MB of system RAM.

Now, on to your primary question.

You will need some kind of boot manager. Either a software package, a hard drive switch, or to enter BIOS setup and change which drive is the boot drive.

Chas

by syst3m.admin1strator

There are many different ways you could go about this, you could dual-boot the system which is a little bit fiddly because of vista's new boot-up routine.

having a second HDD you could install the other OS and just select what HDD to boot into at POST.

use vmware and create a vitual 98 system that way you can run both at the same time, although you will need to have a decent system to power vista and the virtual machine.

This discussion is closed to new replies.