Discussion Locked

Two Soundcards???

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I Am Currently running WinMe O/S plenty of ram HD etc etc but I am running a Program called BPM Studio. This is a mp3 mising prog. In this program I use two sondcards these are SB live (PCI) and a Aztech 16 3D(ISA). The SB live is used for the main sound and the other for monitor. I am using directsound drivers ( Because It won't let me use the kernel Drivers) wit a latency of 24ms. The problem is that after 3+ min into a song (The One I'm monitoring aswell as playing the timimg becomes different between the 2 cards ( Is this a prob caused cos of ISA/PCI & if so how can I fix it) or is there some secret driver that I have no idea about that everyone knows of.
Also I did get advice from someone and that waas just to use the SB live front and rear for both channels He gave me a patch & when I did I still couldn't select the monitor to front speakers (but i could select everything else to rear) ???? help thx

5 replies

by houghton_andy

This is an interesting problem. The problem could be caused by two things. First, the PCI and ISA buses run at different clock speeds, possibly with different crystals(some buses can split the speed of one crystal to get serveral clock speeds). Thisis however very unlikely as the reason for the crystals in the first place is to accurately keep track of time. If this was happening then the sound would always be out.
It is more probable that the sound is getting out of sync due to interrupts and the operating system processing the data for each sound card at slightly different times. In either case there is no way that I know of to fix this. You could try only using the one sound card, or buying an upgraded sound card that can do what you want to do.
Hope this helps...
...Andy Houghton

by estebandelatorre

I think that may be the ISA card the one that is causing the problem. I recommend you to remove the isa card and install a PCI one, preferable the same model (sb live)
With one set of driver installed and the same bus, may be it work.

Hope it helps!

This discussion is closed to new replies.