Discussion Locked

Tyan Tiger S1834 Support 1GHz?

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,
My question is concerning the Tyan Tiger S1834 Motherboard. I read the specifications for this board and it says that it will support a P-III 1GHz Coppermine with a 100MHz FSB. It will also support a P-III 933MHz Coppermine w/ a 133MHz FSB. It is a dual processor motherboard. My first question is that, despite it being a dual processor board, can I just run 1 processor on it? My second question is that I have been looking at P-III Coppermine chips but I can't seem to distinguish why the 933E is different than the 933EB. What does the E and EB stand for? Thirdly, also in my shopping for the P-III Coppermine 933 or 1GHz, I have seen it described as S.E.C., is this a normal slot 1 chip? Fourthly what does .18 Micron mean?This question is worth 300 points for 4 questions! Thanks!

6 replies

by pschuvie

Well lets see

1. Yes though it can take two you only need one to make it work

2. We've got the standard, the B (133MHz bus), the E (256K L2 on die), and the EB (both 133MHz bus and 256K L2 on die).

3. I think your seeing SECC. The Pentium III comes in an updated version of the SECC (Single Edge Contact Cartridge), fittingly called SECC2. This form factor plugs into a standard Slot 1 socket, but is slightly smaller in size, and has better heat diffusion properties, because the heatsinkcan make direct contact to the chip with SECC2.

4. how small can you make things.

This refers to the size of lines capable of being etched onto a chip. A fabrication plant with a .25 micron process can create smaller chips that consume less power, and can run faster than a fab with a .35 micron process.

HTH

by dcosgrove

One of them is easy. Yes you can run a single processor. Most of the time the board will come with a card that looks sort of like a memory module. Insert it into the secondary processor slot and set any appropriate jumpers correctly and you're off. As far as .18 micron, that is just a manufacturing tolerance intel claims makes the chips smaller and use less power. S.E.C. stands for single edge cartridge (slot 1 for us normal folk). Now to keep this brief, E is for advanced transfer cache,B is for 133 Mhz bus support eb means the chip has both. To the best of mine knowledge, any processor labled with the E has the coppermine core. Sorry space is so short. Take some time and flip through intell's developer pages. Lot's of time, they can be very confusing.

This discussion is closed to new replies.