8 replies
by d_v ant
I would buy the ATA 133. Even though my computer only has an ATA 100 IDE controller, at some point I may upgrade to one with ATA 133 capability and I would already have the drive to match. The drive will work at ATA 100 untill I do so. Even though my PC wouldn't be able to use the full burst transfer speed of the drive, I would still benefit from a higher sustained transfer rate than I would get with the ATA 66 drive. Everything would load faster. More speed for the same money is always better.
My philosophy is to always buy as much (quality, quantity, or speed) hardware as I can afford at the time so that I would not have to upgrade so soon or often.
Hope this helps.....
by lncyr
by thechas
If your PC does not support at least ATA / UDMA 66, I might consider the slower UDMA66 drive.
Many of the ATA133 drive require special setups to run on UDMA33 and slower controllers.
Personally, I would buy the ATA133 drive, and spend an extra $30 - $50 for an ATA133 controller card.
ATA133 has roughly 2X the data transfer rate of ATA66. That is why you want the ATA133 drive.
So, $50 extra for double the transfer rate, sounds like an easily justifiable upgrade to me.
Also, having an extra 2 IDE channels allows you to set things up so that there is no chance of a CD drive slowing down the Hard drive, and allows you to have your CD drive, and Cd burner on seperate IDE channels.
I have ATA100 controller cards on my PCs, and the 50% faster data transfer rate (compared to the ATA66 on the MB) is worth every penny I paid.
Chas
by thechas
Here's a link to an ATA133 controller card for under $30.
http://www.compgeeks.com/details.asp?invtid=PCIATA133-NB
Chas
by lncyr
by wlbowers
The 133 is suppose to have twice the data
burst transfer rate as the 66. That is if the
motherboard supports the ata133 standard.
There has been some discussions
concerning these standards and if the drives
actually achieve the specifications. Even if
they don't make the 66, 100, 133 data rates,
they do (again if the mb supports the
standard) provide data transfers above the
previous standards.
Here are a few sites that discuss these
standards.
http://www.aopen.com/tech/techinside/ata133.
htm
http://www.littlewhitedog.com/reviews_hardwa
re_00034.asp
http://www.amdmb.com/article-display.php?Art
icleID=151
http://www.anandtech.com
Hope this helps you make your decision.
Good Luck Lee
by lncyr
by lncyr
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending