Discussion Locked

unable to format hard drive as fat32

0 helpful
22 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I bought a maxtor 6 hard drive and I am trying to format it on my pc (windows xp) as fat32 but when I click on it to format the only option is that appears is NTFS and not Fat32. Is there another way I can format it as a Fat32?

22 replies

by thechas

What size hard drive, and which Service Pack level on XP?

There is a limit on the way Microsoft implemented the FAT32 file system that limits you to 137GB for a FAT 32 volume.

Also, for drives larger than 137GB, you need XP SP1 or SP2 in order to work with the drive.

Chas

by thechas

I don't know Mac's.
I thought that the Mac used a different file system.

Like all things at Microsoft, I find conflicting information.

Theoretically, FAT32 is capable of volumes up to 8 Tera-bytes.

Yet, there are pages that state that XP is limited to formatting no more than 32GB per FAT32 logical drive:

http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/Default.asp?url=/resources/documentation/Windows/XP/all/reskit/en-us/prkc_fil_cycz.asp

Why do you need the drive as a FAT32 volume?

If it will be used on a XP system, there are advantages to using NTFS.

If you do format the drive as a single FAT32 volume, the resultant large cluster size will eat up your hard drive space very rapidly.

Remember, each 1K file will use an entire cluster. At 32K per cluster, 32 small files will use up 1MB of drive space. Also, a 33K file will use 2 clusters, or 64K of drive space.

If it will be used on a W98 / Me system, I STRONGLY recommend partitioning the drive into smaller logical drives.
Perhaps, 2 64GB drives and the remainder as a 3rd drive. For Windows 98, I limit logical drives to 32GB to avoid issues with large drives and to keep the cluster size from getting too large.

Please check out the articles on partitioning posted at www.aumha.org

One possible option for formatting the drive as a large FAT32 drive would be to boot from the Maxtor utility disk or CD and format the drive using Maxtor's utilities.

Chas

by thechas

Alright.

Have you tried the Maxtor tools?

http://www.maxtor.com/portal/site/Maxtor/menuitem.3c67e325e0a6b1f6294198b091346068/?channelpath=/en_us/Support/Software%20Downloads/ATA%20Hard%20Drives&downloadID=58

If you cannot format the drive as a FAT32 volume with Max-Blast, then your only option is a third party utility such as Partition Magic or Partition Commander.

Just out of curiosity, since this is a data drive, are you using a hot-swap bay or an external drive enclosure?

Chas

by thechas

Found this information at Maxtor's site:

Maxtor External Storage devices are shipped with the FAT32 Windows file system installed. The drive will mount as a Windows-formatted disk on the Macintosh desktop; however, the Macintosh disk repair/recovery tools cannot repair or recover data from Windows-formatted drives.

For the highest performance and compatibility, we recommend you reformat the drive using the Mac OS Extended format. However, if you will be transferring files between a Windows system and a Macintosh, leave the drive in the FAT32 format, you will have to either:

*
Limit the FAT32 Volume sizes to no more than 32GB in capacity.
*
Format the drive with a Mac OS Extended Volume. Use a Third-Party Utility that allows you to view (read/write) Mac Volumes from a Windows PC. Click here for more information.

Caution: Formatting the drive destroys all data contained on that drive. Make a backup copy of all your data before formatting your drive.

http://maxtor.custhelp.com/cgi-bin/maxtor.cfg/php/enduser/std_adp.php?p_faqid=908&p_created=1012839999

http://docs.info.apple.com/article.html?artnum=75320

http://www.mediafour.com/products/macdrive6/

So, it looks like you have some decisions to make, and / or a utility to buy.

Finally, OS X.3 is supposed to be able to read NTFS volumes.

Chas

by mikex

Boot from win 98 start (loook in internet for boot disks)floppy and do in DOS:

1. Fdisk =>erase any existing partition
2. Create a single active partition
3. restart to DOS and type : format c: /sys

After that install WinXp without reformating the hard drive over the existing partition

by rg_529

the hard drive is 160 gigs. im not sure about the service pack.
But if i can't format it as fat32 on xp can i do it on a mac?

by willcomp

Information in answers above is correct. Little added info.

You can have a partition up to 120GB using Win98SE to format drive with FAT32. Still will be necessary to have 2 partitions.

Like Chas, don't know why anyone would prefer FAT32 over NTFS.

32GB limit for FAT32 in XP is MS way of persuading everyone to use NTFS.

Dalton

by rg_529

the reason why i want to format it as fat32 is because when i formatted it as NTFS the harddrive did not mount on a mac. Then someone partitioned the drive on a mac and it worked(well, kind of...) I could use the drive on a pc and on a mac os 10.3 but not 10.2! it would recognize it as a drive but the drive would not mount on 10.2. this is a problem because i go back and forth between my pc, mac os 10.2, and os 10.3. I've asked many technicians as to why this is happening and im getting so many reasons that i don't know what to do. someone told me it was because i didn't format it as Fat32 which allows it to go back and forth between all three. another person told me it was because the hard drive was dead! is that true? i am so confussed.

by house

You can only format your XP partition with a maximum of 32 gigs with a fat32 partition. An additional fat32 partition can be created to cover the rest of the space.

Xp can access fat32 partitions on the same drive which are significantly larger than the OS partition limitations.

Your drive is not broken. If you want XP on fat32, you can only use a maximum of 32 gigs for the OS. That is the limitation of the software. There is nothing you can do about it.

by youssifm

i can not add more than above, but try to partition it to 5 partitions, using xp setup, formatting, then format as fat32, or like in win98 boot disk format it as single partition, after fdisk that will tell you it is 10gb, don't worry, just use the ratio you want in fdisk, then format c: /s

by awfernald

hmmm, not sure how, but on my xp pro box at home, my primary partition where xp is installed is 62.9Gb and formatted Fat32 (because I still use Win 98 for some things)

by wlbowers

Some articles on Fat32.

Q327202
http://tinyurl.com/2rw69
PRB: BIOS May Limit Fdisk.exe When Partitioning Hard Disks Larger Than 128 GB

Q263045
http://tinyurl.com/263yx
Format Displays Size of Partitions or Logical Drives Larger Than 64 GB Incorrectly

Q263044
http://tinyurl.com/u8b4
Fdisk Does Not Recognize Full Size of Hard Disks Larger than 64 GB

Q154997
http://tinyurl.com/2eot7
Description of the FAT32 File System

Q184006
http://tinyurl.com/33lyg
Limitations of FAT32 File System

Good Luck Lee

by hackersforum

your hard drive is too large to be formated as a single fat32 partition. Fat32 can support 32GB partition under normal conditions. Secondly, u also need to install service pack 2 for XP to read it.
cheers!

This discussion is closed to new replies.