Discussion Locked

Undependable Fiber Link

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a fiber connection between two IDF's in my building. It is a 12 pair fiber run between the two IDF's and it is run thru interducting. The cable is terminated with ST connectors into fiber patch panels. The problem is that the fiber links will go down and need to be reterminated. No one has access to the patch panels and the connections have gone down at night when no one is in the building. I am stumped on this one and any help would be appreciated.

6 replies

by johnd

Do you mean the terminating connectors need to be removed then reapplied? If so if there excess strain or environmental issues?

by ctrimbath

As far as we can tell there is no excess stress on the cable. It is terminated in a rack mount shelf type fiber patch panel. By enviromental conditions does that mean extreme temperature changes? Both closets maintain a pretty constant temperature around 68-72 degrees.

by johnm

I haven't experienced that myself but the installer for the f/o contractor that we use was yarning once about having a set of bulkhead connectors (what the ST connectors plug in to)that didn't properly match the ST connectors that he had installed.The length was just enough different that the fibers didn't quite butt up against each other. He didn't mention how to test for the problem, unfortunately..

This discussion is closed to new replies.