Question Locked

Unknown Partition

0 helpful
22 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have recently installed a 160 GB Seagate Baracuda Hard Drive. I cloned my old 30 Gb's image onto the 160. When I booted it up I noticed that my computer only sees 135 GB of it.

I have a Dell Dimension 300 Bios Version: A02 So, I thought the reason that the HArd Drive was only showing 135GB is because I needed to update my BIOS. I went to Dells website and downloaded BIOS Version: A03. When I rebooted my system it was still recognizing 135GB of the Drive.

I went to Disk Management and noticed that the extra space that wasn't showing up was listed as an unknown partition. I right clicked on it and the on;y option I had was "Delete Partition" the other options were grayed out.

My question I guess is should I have updated my BIOS before I installed the Drive, or is there a way for me to get this "Unknown Partition" usable?

Any Suggestions????

22 replies

by ontheropes

Using the search terms "partition manager".

I'm familiar with Norton's PartitionMagic 8.0.
PM could be used to delete the unknown partition, and resize the active partition to fill the unused space. The drawback is the cost as it's unavailable as trial software.

One of the results from my TR search leads to here:
http://www.acronis.com/homecomputing/products/diskdirector/

I've never used Acronis software but I see that a trial is available. It looks to be able to do everything that PartitionMagic does and if you want to buy it it's $20.00 less.
I don't know if it's a full-featured or crippled trial.

Without my reading the search results in depth I can't say if there is another, more direct, solution to your issue.

by rob miners

I am betting that it will have your preinstall OS in there. If you just delete it you will not be able to recover the PC. Unfortunately the larger companies don't ship there PC's with CD's. That is how they are installing software for you that you probably wouldn't dream of installing yourself.

by ontheropes

Why would his original 30GB drive use 25GB for a recovery or preinstall OS partition?

My Dell had a recovery/restore partition until I deleted it. It didn't show as an unknown partition. I can't remember what file system it used and don't care to find it in my archives but Windows and Norton identified it correctly. I recall it being less than 5GB in size for a 300GB HD.

The only times I recall seeing an "unknown partition" error was when a GRUB bootloader was in the first partition and/or the MBR was messed up for some reason.

Edited for clarity.

by tig2

A recovery part will identify itself.

In this case, the original "saw" itself as 30 GB. It opened its eyes only partially to "see" the new space.

Part Maj or similar will fix the issue.

by ontheropes

I'm kind of, sort of, curious as to the "clone" tool too. I use Nortons Ghost (the version escapes me at the moment).

Though this is after the fact, it might have been better to setup the drives as Master-Slave so as not to lose any existing recovery partition.

Having a computer with data that you want to retain without having OS installation disks and verified backups is like walking on thin-ice. You might make it okay but I'll say, "better you than me".

by rob miners

hidden partition could have possibly been corrupted. I have had clients PC's where they have been exposed and written to. had the original drive been looked after IE: defrag & dskchk. Was there a currupt area on the drive that was cloned?
There is a risk that you take when you clone older drives.

by rob miners

Compaq and Acer are just two companies that i know of that install the XP OS to a FAT32 environment. There was no reference to NTFS in the original Question.

by rob miners

dawned on me your PC shipped with 98 Disk Management is in XP. Was this an upgrade or a fresh install? If it was a fresh install what are the steps that you took to perform it?

By the way i never was any good at maths. Not to quick to catch on sometimes as well.

by rob miners

you run a methane factory?

And seriously i dont think that it would hurt to delete the "Unknown Partition" and reclaim the space. It certainly looks like someone had a play with that drive. Could also have had a play with Linux.

by ontheropes

Good stuff.

You're right. It wouldn't hurt to delete and reclaim that partition using Norton, Acronis or whatever. I've done it more than once with Norton.

It's hard to say what happened but that space in the unknown partition shouldn't be lost forever.

by rob miners

remember which version of Ghost that you used? I use G7. The interesting thing that I find with it is that I have more success if I only copy the Partitions. If I copy a drive it seems to find a lot of things like bad sectors so I gave up on copying the drives. I am not sure what difference it makes maybe treats the data a different way.

by rob miners

I just checked the recipe. Never heard of it before. I will have to try it. As we head into our winter months it may help to warm us up. I used to propagate broccoli on a farm just outside of Canberra. I would start it under lights well before spring. It took the markets awhile to figure out what we were up to. We were the only farm that could sustain the demand for awhile.

by ontheropes

They just jacked the prices up. $6.49, I think for just S&SB. It's $3.00 if you get it with a sandwich or a meal. It's pretty easy to see the bargain there.

by rob miners

haven't got BigBoys here yet. No doubt we will though.

Did you know that ghost was originally written by an Aussie Programmer? He sold the patent to Peter Norton who in turn sold out.

Were we answering a question for somone?

Keep in touch
Rob

by ontheropes

Short answer- I KNOW "restore" works well for an OS drive. I can't say for sure about "copy".

I generally don't copy drives and don't remember any issues about that.

What I do before working on someones PC here is to pull their HD, put it into an external USB caddy and make a complete backup before I do anything else.

I use standard compression, verify the backup and divide it into the 100MB default size.

That's not to say that I haven't "copied" drives and partitions without any problems. I have, though at this minute I don't clearly remember copying the C: drive. I think I have but I won't say for certain.

One of the things I found about Ghost when I first started using it was that you can only "restore" to an unformatted partition, then set the drive active for booting. It would've been nice if Norton had put that in their help files somewhere. It may be there but I had to figure it out for myself.

If I were to copy an OS drive I'd copy it to an unformatted partition.

If that's what you've done and it came up with errors it may be because, I'm guessing, the "restore" function of Ghost acts like the "format" command and marks bad sectors as part of the restore process.

This discussion is closed to new replies.