Question Locked

Upgraded Memory ?

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently purchased 256mb of SD RAM for my HP Pavilion XL768. I already had 384mb in it. A 256 and a 128 chip. The total memory that the computer can hold is 512. After putting the new memory in the computer read it fine. But, after doing a couple of apps the computer crashed(blue screens), with messages like IRQ_Less_Then_Equal was one of the messages. Another was disable BIOS caching and shadowing or something like that. I tried switching slots...same result. I even tried running the computer w/each stick individually and they both worked. It's only when they are in together I get issues. I called HP support and spent $70 for tech help...didn't work. If anyone has a suggestion on what to do to solve this problem it would be greatly appreciated.

8 replies

by mjd420nova

I'd find a way to recycle the memory into other machines and purchase a matched pair or a single memory card to support the unit. Obviously they were close enough to each other to not fail outright, but don't play well together.

by thechas

Are you running Windows Me that came with the XL768 or have you upgraded to XP?

If you are running Windows Me, it is possible that you are running into the Windows 9X memory bug. Windows 95, 98 and Me have problems when installed RAM exceeds 511MB. This is not the issue if you are running XP.

Check out this MS article:

http://support.microsoft.com/kb/253912

I know that it states over 512 MB. But, I have seen the bug show up on a number of systems with just 512 MB installed.

If you are running XP, the first answer is correct in that the 2 RAM modules may not be compatible with each other.

Chas

by mparris91

I also had both in and running for a while w/o any issues. Do you think there is a BIOS setting that can be changed to fix this issue. One other thing, how can I disable BIOS shadowing and caching? These were 2 of the suggestions that showed up in the blue screen errors. Thanks guys for your responses and help...It's been frustrating.

by thechas

It's possible that the RAM modules have differences in their clock speeds or access time. If so, the slower module should be in slot 0/1, and the other module in slot 1/2.

If the new module has 1/2 or less the number of ICs on it, they may address differently enough that they are not compatible. It is even possible that the new RAM is not compatible with your motherboard.

Anyhow, "IF" your BIOS allows you to adjust the RAM settings, they are on the Advanced BIOS or Advanced Chip-Set Features section. Set them to a medium or slow setting to see if timing is the issue.

Chas

by thechas

I just spent some time on HP's web site trying to find details of your BIOS setting options.

I tend to forget (ignore is a better term) that many of the major brand computers let you have very limited access to the BIOS settings. They do this to reduce service calls because someone changed a setting that they should not have.

Anyhow, your best option may be to get 2 identical DIMMs that are specifically compatible with your system.

I did have one more thought. Since this worked for a while, it is possible that the problem is not with the RAM, but with your power supply. Another reason I do not buy name brand systems is that the power supplies are usually just large enough for what hardware comes with the system. Add a DVD burner, or more RAM, or a number of plug-in cards and USB devices, and you overload the power supply. That coupled with the age of the system suggests that the answer might be a new power supply.

If the system has ever gone through a re-start since you installed the extra RAM, that would help to confirm that the power supply is weak.

Chas

by mfvx20

I too had this problem recently. Fortunately I purchased the new memory from a reputable supplier, who spent some time analysing the problem. Each of my memory units worked separately, but together only the new one was seen by the bios - check this at startup. The diagnosis was the chip density of each unit. The vendor replaced the new part with another and all was well. No charge for any of this.
See Crucial Memory web-site.

This discussion is closed to new replies.