Discussion Locked

Upgrading an old pc

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a few questions about upgrading my old PC.
I want put a bigger HD and upgrade the RAM and was wondering about a few things. I'm currently running W95 and I simply want to replace the current HD instead of slaving a new HD and installing 2000pro. Just wondering how do u find out which HD and RAM is compatible with my motherboard(it's dell demesion xps h266)? Any input would be grate.

thanx

13 replies

by ann777

You computer has an IDE drive controller, you can use IDE or EIDE.

For larger hdd's you need to check for BIOS upgrades and for windows 2000.

http://support.dell.com/us/en/filelib/device.asp

Step 1 = windows 2000
step 2 = english
step 3= all (down at the bottom of the selection list)

You will need to download and check the manual for RAM specifications.

by pbossart

Ram is size dependant by the number of pins. be it 72, 168, rdram, etc. You sould be able to look at it and take a guess most likely you'll be correct. Or remove one and bring it with you when you go to purchase more. Your HDD is probably IDE, as many pc company's use this because it's cheaper. But this can be told by looking where they plug into the motherboard, usually labelled ide0 and ide1.

by thechas

The easist way to check on what your ram upgrade path is is to go to one of the major memory mfg web sites and see what they sugest for your system.
www.crucial.com
www.kingston.com
www.pny.com

Another concern, is how fast is your CPU?
At some point, a new system will make more sense than upgrading.

by purplebook

Most generally, the HD will be IDE. An IDE has a 40-pin data cable connector, and a SCSI has either a 50-pin or a 68-pin cable connector.

Memory, SIMMs that are 72-pin are shorter than DIMMs. SIMMs have one notch in the middle (along the pin side) and DIMMs have two notches, like this: xxxxx xxxxx = SIMMs xxx xxxx xxxxx = DIMMs. Not a clear composite of the actual memory, but you get the idea.

Another thing you need to look at is the BIOS (for the HD) to see if it can handle a larger drive. Check with Dell to see if they have a BIOS upgrade for that type of system.

As for OS, it is your choice. For that old of a system, I would recommend either 2000, or ME. XP would just chunk in a 266 enviornment.

by the gardener

www.upgradingandrepairingpcs.com
if you want to know all about a pc this is the book you should have for refference. the new 13th eddition has information pertaining to what can happen if you attempt to upgrade a dell or a gateway, i read some infothat all things concidered "normal" for installing parts one of these brands will smoke when you turn it on, so be very carefull and consult with dell, you should find everything about your machine on there website. realise that win NT 2000 uses theNTFS file system on the hard drive and win 9X uses the FAT file system and you cannot read one on the other but you can use partition magic to convert one to the other.

This discussion is closed to new replies.