Upgrading Memory
I know Memory is plug and Play. But are there other things I should be doing in the settings, to upgrade. Someone mentioned Virtual memory settings to me.
Thanks
Hardware
I know Memory is plug and Play. But are there other things I should be doing in the settings, to upgrade. Someone mentioned Virtual memory settings to me.
Thanks
by thechas
Much as they should be, memory modules are NOT always plug and play.
Make sure that when you purchase more RAM that it is compatable with your motherboard.
There have been numerous postings in this forum of users who have had trouble with "new" RAM modules in older motherboards.
Double check with both the system / motherboard mfg, and the memory mfg to verify compatability.
The major memory mfgs can help you out at their web sites.
www.crucial.com
www.kingston.com
www.pny.com
Next, be aware that there is a bug in Windows 9X/Me where some systems do not function with more than 511MB of RAM.
This is not an issue with Windows 2000 or XP.
As to "virtual memory", also referred to as your "swap" file;
Windows often needs more memory than you have, so it creates a file on your hard drive that is used as "virtual" memory.
There have been many discussions on how to optimize system performance by changing virtual memory settings.
I set up my systems for stability, not 'benchmark' performance.
I set up a seperate partition on the hard drive of 1GB to 5GB and allow Windows to use the entire partition as it desires for virtual memory.
At a minimum, you need 500MB of free hard drive space for virtual memory to avoid system crashes.
There is some potential performance improvement to be gained by setting a fixed size for the swap file, and locate it at the start of the first partition on your fastest drive.
You can use a utility such as Norton Speed Disk to do this.
Chas
by anunley
by opatzg9
The Chas knows all, good answer! I've heard a lot of people setting there virtual memory file to double their ram + some fixed number on the other hand all the people I know who do this also have 384 meg of ram so basically their setting it around 1 gig. The advantage of making it a set size is it can be defragged, left on its own drive, and "should" never run out of space since it knows it is limitted. I don't know if Chas stated above or not but some memory does not work with others as well. So you kind of need to identify what you are currently using unless you are replacing it all. Memory prices are great right now so now is a good time to upgrade that portion of your machine.
Good Luck!
by anunley
by yelhsa3840
by anunley
by anunley
I need to add a few details, about my memory dilemna. These are all Dell's purchased in 2000.
I called Dell, they have told me that the GX110.
Win 98 had a problem upgrading with a 256 module.
adding 128dimm is no problem. but if using a 256, I need to do a Flash Bios upgrade.This revision would correct the memory problem.Also of course they advise buying only their memory. I'd like to go to crucial.com we have over 100 machines. It comes down to this for me . I need a straight forward procedure to try on a few machines first, before upgrading all our PC's Thanks to all of you for more suggestions. Angie
by hjs
by anunley
by anunley
This discussion is closed to new replies.
Sort by Trending