Discussion Locked

upgrading rdram

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Gateway Performance 1400 with 128mb rd ram pc 800.
I have purchased kingston rd ram 256mb pc 800 from bigegg.com.
Bigegg offers no tech support, and everyone at work in the IT dept says it should work fine. But do I have to take out the old, insert the new,and move the old to a different slot. I have 4 slots for mem.

8 replies

by thechas

I checked at PNY's and Kingston's web sites.
I also checked at Crucials site, but they do not sell RDRAM.
To get information from Gateway, you need the system serial number.

Anyhow, PNY claims that you can install memory in single module increments.
Kingston says they must be installed in pairs.

If you presently have 2 64MB DIMMs installed for the 128MB, I would try the new 256MB in the next slot.
If it doesn't boot, the answer is that you need to install memory in matched pairs for this system.

This is consitent with what I have read about P4 systems.

If you have only 1 128MB DIMM installed, I would recomend placing the new DIMM in the first slot, and moving the existing DIMM to the second slot.

While it shouldn't make any difference, having the larger memory in the first slot tends to be more stable.

Chas

by thechas

This is a link to memory test configuration for an Intel 850 motherboard.

http://developer.intel.com/design/motherbd/gb/gb_mem.htm

Remove any spaces from the pasted link.
Basically, it states that for the Intel board, memory must be installedin pairs.
The memory in bank 2, needs to be the same speed as bank 1.
If only using bank 1, bank 2 must have CRIM (continuity modules) in place.

Chas

by bohicam1

Have you opened up the box to see what is in there? Is it 2 sticks of 64 or one stick of 128 and one terminator? If there is a terminator in there, remove it and replace it with the new ram. It should be fine as there will be 2 sticks in there...if not, then try different configs with the term stick in there, 256 MB first, 256 alone with term....etc...I have never mixed sizes of ram on those boxes but I know you need a term. stick in with one ram stick and no term. with 2 pieces of ram.
Good luck!

Mike

This discussion is closed to new replies.