Discussion Locked

US Robotics modem install

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi
I am trying to install a us robotics 56.6k voice fax modem on win ME machine but it does not install properly. It installs on com 2 then after reboot installs a second on com 3 both have conflicts the mobo only has 3 pci slots and no other slots ( onboard sound and graphics ) not my machine by the way. This is becoming infuriating as I know the modem is OK.

2 replies

by thechas

Does the user use the COMM ports?
If not, disable the COMM ports in BIOS settings.
While your in BIOS settings, make sure that any options for an on-board modem or AMR slot are disabled. (sometimes they show up in BIOS settings even if they arn't installed)

Check the default IRQ assingments that the Motherboard uses for the slots.
Choose the slot that has the least IRQ conflicts.
You can check for assigned IRQs by looking in device manager, Select properties for the root device, and you can select to list IRQs.

Was there a different modem on this PC?
If so, make sure that the old modem is no longer listed in Control Panel/Modems.
In fact, remove all modems listed in the modems menu from control panel.

Upon re-boot, Windows should find the modem, and install it properly.

You may need to have the new modem out of the system, and remove the modems, and re-boot twice before shutting down, and installing the card.

Chas

This discussion is closed to new replies.