Hardware
What is needed to upgrade to USB 2.0 and/or 2.03?
I know that you need to install a USB2.0 PCI Card or a USB2.0 capable internal hub. Does the BIO's need to be upgraded and is Windows98SE ok, or do you need windows 2000/NT/XP?
by thechas
The BIOS on your motherboard will not need an upgrade to use a USB 2 interface card.
If you plan to not use the on-board USB ports, (or serial ports) I recommend doing the following before installing the new USB card.
Go into device manager, and remove the USB ports, root hub, and serial ports.
Upon re-boot, go into BIOS settings, and disable the ports you will not be using.
Save settings, and exit setup.
Shut down the system and install the USB 2 card.
(Unless the mfg says to install the drivers first.)
As to drivers, just make sure that the mfg has drivers for W98SE.
I looked through a USB 2 vendor list at www.usb.org their are several mfgs that specifically stated they include W98 drivers.
It would be wise to check the FAQ section of any vendor's card that you are considering to see if they have any known issues for W98, or hardware compatability with your system components.
Chas
by joesedor
This discussion is closed to new replies.
Sort by Trending