Discussion Locked

USB/CAT5/or IEEE??

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

A RECENT CLIENT ASKED:
IS IT POSSIBLE TO CONNECT MY HP 430 D PLOTTER TO MY COMPUTER IN ANOTHER ROOM VIA USB CABLE? THE PLOTTER DOES NOT HAVE USB CONNECTIONS, IT WOULD REQUIRE AN ADAPTER.THESE UNITS NEED TO COMMUNICATE WITH EACH OTHER.CAN YOU HELP ME ANSWER MY CLIENT?
THANK YOU.

4 replies

by thechas

USB does have a limit of around 5 meters for total cable length.
Even at 5 meters, you may need a couple of signal boosters in the line.

www.usb.org recommends using a usb to serial convertor to trafvers long distances.

I have used parallel connections as long as 50 feet. The key is the quality of the cable.

If the plotter can be configured as a network printer, then Cat5 would be my choice as the simplist way to set it up as a remote device.

This discussion is closed to new replies.