9 replies
by enforcer drive Accepted solution
by rob miners Accepted solution
With the external drive attached to a system that will regognise it, press the WinKey + Pause/Break and click the System Restore tab. Stop monitoring the drive and the system volume information directory should be removed.
* Try it in a rear port
The front ports, are connected to a fly lead, and may not be supplied the correct watts of power. Where the rear ports, are integrated into the motherboard, and should have a constant supply of 2.5 watts, of power.
Edit: *
by enforcer drive Accepted solution
by rob miners Accepted solution
Write down all fixed Disk and CD/DVD drive letters so as not to delete them. DO NOT delete any of the fixed hard disk drives or CD/DVD optical drives registry values.
1. Login with Administrative privileges.
2. Disconnect all USB or FireWire storage devices.
3. Open Registry Editor by typing regedt32 in the Run box and navigate to the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices. Right click on MountedDevices and select Export. Save this file as you may need it in case something goes wrong. Save it as Devices.reg, it should default to My Documents.
4. Under HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices there will be registry keys with the name that resembles the format of \DosDevice\X: where X can be any alphabet letter which corresponding to your physical system drive letter.
5. Delete all possible USB drives, FireWire drives and external drives which have a drive letter.
DO NOT delete any of the fixed Hard Disk Drives or CD/DVD optical drives registry values.
Exclude \DosDevice\A: which normally reserved for floppy disk drives.
by enforcer drive Accepted solution
by rob miners Accepted solution
by rob miners Accepted solution
If you did you can do a System Restore to an earlier time.
It is good practice to backup the Registry Key that you are modifying in case something goes wrong. If you did back up the Key add it back to the Registry.
Here is another Registry mod to try.
Why doesn't my computer detect my new USB device when I'm running Windows XP or Windows Server 2003?
by enforcer drive Accepted solution
by rob miners Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending