Discussion Locked

USB problem with Scanner

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have installed a HP5470 Scanner. I can use either USB or parallel so naturally I went for the USB.Big problems occur when using the USB. Windows 98 becomes unstable and takes two blue screens to shutdown. When trying to access the HP software, it takes a while for it to start only to say that it can't find a scanner!
I changed it over to the parallel port and it works fine.
The problem is is that I would like to use the USB but do not know what the problem is. Does it have a problem with the scanner or is the USB port a problem? When running the initial install of the software, it tells me that I have support for Parallel and not USB.

Running Win 98 on a PIII500Mhz with 192MBRAM.
Can anyone help me with this problem?
Thanks
Mil

7 replies

by tjc

make sure you download any updates off the HP site and also the windows updates for you usb hub.

Also try without any other USB devices installed first and see what happens, that is of course if you have other usb devices ;)

by curacao_dejavu

Hi,

1 make sure that your motherboard supports usb and that t's enabled in the bios.
2. make sure you have the latest driver for the scanner.
3.win98 may have some problems detecting the device. check out the following artickles from MS to helpyou troubleshoot the problem.
a: Article ID: Q250635
b:Article ID: Q258773
c:Article ID: Q263218
and finally d: Article ID: Q272584

Success,

Leopold

by cascom

Assuming your MB has USB support and the connectors are MB mounted (ATX style). It seems that the USB drivers for the MB are either not installed or incorrect for your chipset (MB).
Check the MB manufacturer's site for updates/patches/BIOS updates and install these. Being a PIII board is SHOULD have available and operational USB hardware, just not being made available to Win98 which also supports USB.

It will work - eventually.

This discussion is closed to new replies.