5 replies
by techexec2
Here is your punishment for being lazy during the original install :^0 !!
Just kidding...
There is a happy end to your story...
Windows XP can read FAT32 partitions of any size, but will only create them up to 32 GB. This is because FAT32 uses space less efficiently with larger partitions and 32 GB is where Microsoft drew the arbitrary line.
What can you do? Steps:
1. Backup your current 32 GB partition in case something goes wrong during steps 2 and 3.
2. Use Disk Management to convert the partition to NTFS.
3. Use Symantec Partition Magic to enlarge the partition to the full size of the disk.
Happy New Year!
by jamuckley
Hi TechExec2,
Thanks for your advice, but as I converted the FAT32 to a NTFS partition there still was no extra space on the drive to enlarge it to its full size. So I am still stuck.
Any other ideas?
Thanks again,
Jason
That was my first idea when you said that het Windows disk administrator didn't see any unallocated space. Open the case and look at the label on the hard disk. Make sure that it really is the size that you believe it to be.
One thing to check in disk administrator first. Is the disk set to be a basic volume or a dynamic volume? This really shouldn't cause the problem that you are investigating but if it is a dynamic disk try setting it back to basic. Just for kicks.
by wooly11
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending