Discussion Locked

UTP direct linking?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I would like to connect two PC directly using UTP cable where both PC has it own network card
install(RJ-45 connection).The problem for me is I would like to know will it be posibble to
connect two PC using a crossover cable or using straightthrough cable or you can suggest
a good way to me how to position the 8 wire inside the UTP for me to make direct connection
between two PC network card.
Please advice.
Thank you.

5 replies

by rawright

A PC to PC connection requires a crossover cable, not a straight cable. This should be readily available from any cable supplier, or you can build your own. I don't know the wiring pattern at the moment, but a search on the 'net should locate lotsof sites containing this information.

by jpomposelli

Here is the Pinouts for a 10/100 BaseT crossover cable

Name Pin Pin Name
TX_D1+ 1 3 RX_D2+
TX_D1- 2 6 RX_D2-
RX_D2+ 3 1 TX_D1+
RX_D2- 6 2 TX_D1-
BI_D3+ 4 7 BI_D4+
BI_D3- 5 8 BI_D4-
BI_D4+ 7 4 BI_D3+
BI_D4- 8 5 BI_D3-

Jason

This discussion is closed to new replies.