Discussion Locked

VGA Device Problem

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I Have changed my VGA Card from SiS 6326 to Geforce 2 MX 400 Nvidia with 64 MB Video Memmory The System is working Normally but on working I am Encountering some problem while attempting to open some applications or saving some work (not all the time but frequently). The System suddenly hang for 10 Sec and Reboots automatically showing the following message on login to the user area.

Message:
Computer restarted after an unexpected shutdown.Microsoft windows detected a possible device failure

Error signature
szAppName : Drivers.Display szAppVer:53339102029102533
szModName: s3sav2k.dll szModVer: 5.12.1.9016 Offst:FA7106EA

Save Dump Info from Event viewer:
The computer has rebooted from bugcheck. The bug was 0x100000ea (0xff6e3020, 0x8094aaf8, 0x80a382c8, 0x00000001).

My System is Celron 433Mhz/66Mhz, 64 MB SD RAM and MotherBoard Intel Chipset 440BX AGP Set. OS Windows XP Professional.

Please advise me to rectify the problem.

Regards

Mathews PS

4 replies

by jschein

Matthews... I'g guessing that you didn't wipe out your hard drive and load windows 2k with the new video card?

Sometimes windows 2k has a problem of leaving some of the video dll's, registries, and services left behind when upgrading or replacing video cards.

Few things to try... Goto - Start - Settings - Control panel - Administrative tools....

Goto services... And disable all video drivers not related to your current video card.

Also right click my comp. icon, goto properties, goto hardware in the device manager and ensure that is the only video card listed.

Reboot... If the message still comes up, back up your data to cd, floppy, or a network drive... Reload your system from scratch and ensure to have the latest drivers available on cd for the motherboard and video card.

Good Luck.

by djent

A common error when changing video cards is not reverting to a standard VGA driver before the change.

by dmiles

According to the following article:
http://cweb.msi.com.tw/eforum/?target=article&tid=4175
... it looks like the issue is NOT hardware related, but XP/DX8.1/driver related.
I can confirm this via my own tests... an Athlon1.2 w. Radeon7500 and XP will crash at random stages during any 3D game or benchmark. Nothing I could do would fix it... I tried different driver sets, BIOS options, Write Combining options.. zilch.
When I ran my PC up inder Win2k with DX8.1 and the video drivers... everything worked a treat... 3D games and benchmarks no longer crashed. I believe (as the article says) that this a Microsft/Vendor software/driver issue, NOT a hardware issue. I think we must wait until MS/Vendoe releases a fix.

by thechas

You need more system RAM.

With AGP video cards, you should have a minimum of 2 times the amount of video RAM as system RAM.
So, to run a 64MB video card, you need a minimum of 128MB system RAM.
I do not set up XP systems with less than 256MB of RAM.

Personally, I would install as much RAM as you can fit / afford.
With XP, you will see a significant improvement if you increase RAM to 512MB or more.

Once you have more RAM, enter BIOS settings, and verify that the AGP aperture is set to 128MB.

That should correct all the problems.

Chas

This discussion is closed to new replies.