Discussion Locked

VHS (NTSC) to MPEG

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I want to transfer all my VHS to MPEG so that I can store them on my shared drive. What do I need to make this happen??

5 replies

by tjc

if your looking for software - try out www.winvcr.com - this is for those that have a tv tuner card already and want some thing with remote recording and such....

but if you don't have a video capture card already you will need to buy one, and itmay come with software that you can use.

I went to X10.com and bought the webcam setup cammeras and it had a rca connection for for video that I hooked up to my vcr and I'm using the winvcr to record to mpg directly.

by guruofdos

You will need a good quality (budget around ?500) video capture card. I do this for a living and the only one I rate is the FAST AVMaster2000 from Fast Multimedia. Forget any of the Pinnacle (DC10 etc) cards as they produce awful results. The AV2000card also has integrated sound capture, which is important if you want to guarantee syncing the soundtrack with the video.

Any card that has Philips/Zoran Hardware MPEG compression chips will do the job though.

Hook the VCR to the capture cardvideo and stereo audio inputs, then capture using ULead MediaStudio video capture program.

Remember that for every minute of raw video you will need approx 200Mb of drive space. This is before compression. Having produced a compressed file usingthe hardware codecs, a 15 minute video will take around 2.5Gb of space (using resolutions of 768x576x50 frames per sec. for PAL, 640x480x60 frames per sec. for NTSC).

You will have to use a software compressor to encode MPEG movied to work on other peoples machines, and they will need a copy of the codec to 'decode' them. Otherwise, use MPEG compressed Microsoft AVI files for compatibility with Windows Media Player. The files are much larger than MPEG though!

This discussion is closed to new replies.