Discussion Locked

VIA Apollo Pro266T & ATI AIW Radeon 750

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Via Apollo Pro266TD motherboard (MSI MS-9105) with a single Tualatin PIII @ 1.4 GHz running Windows 98SE. I am attempting to install an ATI All-in-Wonder Radeon 7500. Upon installing the drivers the system will not load the ATI drivers on restart saying the hardware or the drivers are not correct. However the Device Manager shows that the card is installed and running properly as a AIW Radeon 7500. The settings tab will only allow VGA. Any thoughts on this would be welcome. ( I have also tried the latest ATI drivers with the same result. )

5 replies

by thechas

How about the AGP mini-port driver for the VIA chipset.

You need to have the latest version for newer cards.

Also, make sur ethat you have the correct version of DirectX installed.

Finally, I have had problems with getting the wrong driver file from ATI.
Make sur to use all the ID tools at ATI's site.
I have found the BIOS number to be the best tool.

Chas

by robp1

This may be a red herring, but I have run into problems with MSI boards with Pro266 chipsets.
In one case, I hade to return 5 KT266 Pro boards to be "modified" (Distributor/MSI would not explain nature of mod) as they would not work with the NvidiaGF4 cards (MX upwards).
ATI wasn't mentioned, but possibly it is a related issue.
Symptons on the KT boards, with a GF4 were; Lockups, blank screens after a garbled display.
Cheers
Rob

This discussion is closed to new replies.