6 replies
by searay200
by mpace
Hi the distance will depend on the quality of cables used and the quality (ie spec of splitter box) the cable from the laptop to the splitter box should be as short as is feasable, and of high quality they tend to be thicker about 8mm in diameter. the cables to the LCD displays you can get away with up to about 20 feet but they also must be of high quality. Set the graphics card resolution to 1024 x 768 at the lowest refresh rate this will reduce the dot clock of the signal ie 1024x768 at 60Hz is 1024 dots in about 16uS wheras 1024 at 75Hz is 1024 dots in about 13uS as you see this is faster and it is the higher frequencies that are reduced. Flicker is not a problem with LCD's.
Hope this helps
Rich
Hi you can email me if you need more info.
Rich
by mpace
by mpace
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending