9 replies
Hi,
Maybe... Take a look at the following site - it lists the beep codes produced by various BIOSs and describes what they mean.
http://www.computerhope.com/beep.htm
(remove spaces from the above URL)
Of course to make sense of them you need to know what BIOS is running on your motherboard. Your manual will tell you this - also motherboard's manufacturer's website will.
Cheers,
Tim.
by thechas
Not necessarily.
You do have a problem.
What you need to do is define the series of beeps.
Is it 1 long and 3 short?
Is it a continuous beep?
Is it continuous short beeps?
If you have a manual for the system / motherboard, it may define what the beeps mean.
Different BIOSes, use different beep sequences for different error messages. Without nowing more about your system (motherboard mfg), and the details of the beeping, it is difficult to provide specific advice.
You can download a BIOS error message guide from the downloads section of Tech Republic.
As a general rule, the first thing I would do, is to open the case, and make sure that all plug in cards and memery modules were properly seated in their connectors.
If you are getting a continuous short beep, it may be that the video card is not seated, or the monitor is bad.
If it sounds like an alarm, some BIOSes monitor the fans and power supplies, and sound an alarm if there is a problem with either of them.
Check and see if the fan on the CPU is spinning.
by jackal314
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending