Question Locked

Video Card v. On Board Video

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Heya,
I have purchased a new AGP video card to replace the on-board one, but it simply will not work.
I put install it to the motherboard properly, and the light and fan of the video card do come on and stay on while the computer is running. But both Windows Vista and BIOS do not even acknowledge that it is there.
I have disabled the on-board video, uninstalled all relevant drivers, and tried just about everything!
I have installed video cards in the past with no problem; I do not understand why this one is not working. Is there some BIOS setting that I am not seeing?
Please help me, I am getting really frustrated by this.

Thanks,
Pip

PS. I do not know what motherboard I have, I am pretty sure it is very generic; it is a second hand computer that has had most components upgraded, now running Vista Home Basic. 512mb RAM, 80GB + 250GB hard drives, DVD-RW drive, Intel Celeron 2.2.. and the video can that I am trying to install is Sapphire ATI Radeon 9550 256meg. I have been told that this card will work on Vista.

2 replies

by hal 9000

Somewhere within the BIOS Setup there should be an option to disable the On Board Video and allow the AGP Port to become the Default Video Adaptor.

This may be something like Disable On Board Video or you may need to set the Video preference to AGP/PCI although generally speaking there is something in BIOS to disable th On Board Video but if you can not find anything look for a setting to make the AGP slot the primary or Default Video Adaptor.

I'm not sure what Vista will do about this as it a mess at the best of times but it should boot to the default Video Drivers and you can then install the AGP Video Drivers from there.

Col

This discussion is closed to new replies.