7 replies
by djent
by mauii
by sgt_shultz
wow, that is cool, i didn't know you even got control over that setting...yes: i vote for a new power supply.
i wouldn't expect extra peripherals to drag down the voltage, just make the ps fail quicker...i would sure like to know if yanking off devices changes anything...
by mauii
by thechas
Sounds like you need a new (higher wattage) power supply.
The 3.3 volt power comes from the power supply itself.
If you know how to use a volt-meter, you can probe the pins on the power connector, and verify if the 3.3 volts is indeed low.
I suspect that it actually is low.
You want at least a 400 Watt power supply for this system.
Make sure that the 3.3 volt is rated for at least 30 Amps, and that the combined 5 volt and 3.3 volt rating is over 200 Watts.
Chas
by a_welch
Most likely replacing the power supply, which includes the 3.3V converter, will fix your problem.
However, if you want to be thorough and you have a voltmeter, you might check the 3.3V output with everything including the mobo disconnected fromthe power supply. The reason is that something on your board might pulling your 3.3V down (overloading it). If that is true then the new PS will do the same thing.
It might save some time and $ to find this out before you go get a new PS. If your PS is good then you have to figure out where the problem really is or replace the board.
by wlbowers
Replace the supply and in the process go to a 400watt.
The newer motherboards and cpu's demand more from the supplies.
Good Luck Lee
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending