Discussion Locked

Want information on Epson C-80 printer

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Have a C-80 printer and I have only printed out 2- 4x6 color photos and it always in the Black mode and yet I have used up the 4 color ink cartridges. I will never buy a Epson product again as I wrote them with the problem and they never addressed the problem at all. I would like a way I could possible use it by removing the color cartridges until I needed them. I live on a very small fixed income.
Thank you.
Richard Devaux

13 replies

by opatzg9

Richard the only thing I could recommend here is to use an ink jet refill kit. I had an old epson stylus color and I still beleive it was the best made color ink jet printer out there. Refilling the carttridges was easy once you had 1 successful refill. I've owned lexmarks and they go thru ink like you would not believe, I now own an hp and it's about double the lastingtime of the lexmark but its' still less than half what I used to get from my epson. My epson lasted me 6 years where I got rid of the lexmark in 1, the hp is now 1 1/2 years old, so I woould not give up on your epson yet.

by opatzg9

http://www.malibu-interactive.com had the following cartridge refill options:

Epson S020010, S020062
Epson S020025
Epson S020031
Epson S020034, S020036
Epson S020047, S020049, S020097
Epson S020110, S020193, T001 (PHOTO)
Epson S020089, S020093, S020108, S020138/87/89/91, T001011, T003011, T005011, T013201, T014201, T019201, T020201
Epson T007201/401, T017201/401. T008201/401, T018201/401, T009201/401
Epson Compatible Cartridges and Zap-It Compatible Cartridges 585, 586, 587,588, 589, 590, 591

Not sure which cartridge you use but if you do a search for inkjet refill kits at yahoo.com you will come up with hundreds of thousands of hits. I didn't see the c-80 labelled specifically anywhere other than the already prefilled cartridges or discount cartridge offers.

by opatzg9

Most the refills I've performed, you were required to drill a hole through the top of the ink cartridge, some you even had to remove the top cap on the cartridge to fill. You may also then need to reseal them with either a hot glue gun/or some other ingenious way to recreate the vacuum seal that was there. Specifically for your printer you'll need to locate the refill instructions if there are any from the refill site.

by rdevaux2

My previous printer was a canon 620 which I had for 6yrs and I was very happy with it. THe cartridges were much smaller and lasted 3 times as long. This printer has a circuit or something built onto the cartridge, How do you refill those ? They arenot supposed to work without that circuit.
Thank You
Richard

by rcom

In order to print pure black you must select a non-glossy paper type otherwise it will print composite black (a blendd of black and colors).
Epson printers also use up more ink cleaning the cartridges than is used for printing. Only suggestion is to change the photo to black and white using the software before printing.

by jaytmoon

I have the same printer and similar sentiment. Unfortunatly you can not run the printer without the color cart.s in place. Also, the folks abovew forgot that this printers oem cartridges have a "one use" IC chip embeded in the unit. In order to re-fill them you would need to invest in a reprogramming device to re-set the chip. Then get the ink refill kit to boot. it could add up to more than $90 us. I am purchasing "compatable" cartridges from www.Milcom2k.com They have units that will work inthis model without costing half that of Epson brand. Its a lot simpler and more econimical than the other route.
Oh yes, My previous printer was an Epson stylus 600. You could refill those till the tank wore out with good results.
LOL

This discussion is closed to new replies.