10 replies
by kurtandersen
You do not say what video resolution you have set on your PC. Some DVD players will only allow a low resolution, this should be in the instructions for your dvd player/ software. My experience is that to play dvd's on the television, you will need to set your resolution at 640 x 480, or 800 x 600. Try these settings and then see how you go.
Regards,
Kurt Andersen MCP
email: kurtand@iname.com
by kerry.howard
Some drivers require you to explicity enable the TV-Out connector (Start Settings Display Settings Advanced).
Another thing I've seen is some adapters won't detect the TV Out as an option unless it is connected - and turned on - at boot time.
Resolution should not be above 800x600 for TV sets to play nice with the computer
by kerry.howard
by kerry.howard
by abubin
The reason only sound is heard because they are both connected from different source. Sound from soundcard and display from video card.
That means the problem lies on your video card. As far as I know, with detonator, you have to enable the second display adapater on the settings somewhere. Then, from the you have to specify what sort of display is the second adapter connected to. So, in you case select TVout. From there, perhaps you should look at various resolution for your TVout and not for the PC. Try to look for NTSC or PAL setting.
by kerry.howard
by mshavrov
Try to look ALL drivers for you video card at manufacturer's web site. Read their recomendations especially related to DirectX version. I had similar problem with ASUS TNT card. With some combination it shows everything except video itself, sometimes it does not show windows priograms but shows video. Try to switch application to full screen mode. It's " what if..." process.
Good luck.
by kerry.howard
by kerry.howard
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending