Question Locked

western digital 33gb limit resolve

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i have a western digital 40gb hard drive, but my machine and other machines can only recognize 33gb of it. please anyone help me resolve this problem, i need every bit of my 40gb.

3 replies

by thechas

Theoretically, a 40 GB drive should appear as not more than 37 GB when partitioned.

There is either a hidden partition on the drive, or a lot of bad sectors.

Check out this WD page on drive capacity:

http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=615&p_created=1034613413&p_sid=vh4Z-PCi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD03NiZwX3Byb2RzPTg1LDgmcF9jYXRzPTAmcF9wdj0yLjgmcF9jdj0mcF9zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9mbmwmcF9wYWdlPTE*&p_li=&p_topview=1

You might also want to download Data Lifeguard tools and / or Data Lifeguard Diagnostics to check for bad sectors and hidden partitions.

Chas

by tampa_poet

I'm assuming you are talking about an IDE drive connected directly to your computer (vs SCIS, USB, or SATA).

This sounds to me like you have an LBA48 problem. To access drives larger than 32 Gig, you need to have LBA48 (48 bit long block addressing) enabled in the bios of your motherboard. I've had your exact problem on computers more than 5 years old. Most times, a simple BIOS upgrade fixes the problem. Sometimes, there is a jumper on the drive that can 'work around' the problem.

Good luck!

This discussion is closed to new replies.